XDMA7715

INSTALLATION/OWNER'S MANUAL AM/FM/CD/MP3/WMA/Bluetooth® Ready Receiver with 2-Step Motorized Detachable Face XDMA7715 READY Free Datasheet http://www.datasheet4u.com/ XDMA7715 INSTALLATION Preparation Please read entire manual before installation. Before You Start  Disconnect negative battery terminal. Consult a qualified technician for instructions.  Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started Remove trim ring from unit, Remove 2 transit screws located on top of the unit. Insert the supplied keys into the  slots as shown, and slide the unit out of the mounting sleeve. Install mounting sleeve into  opening, bending tabs to secure. Connect wiring harness and  antenna. Consult a qualified technician if you are unsure. Certain vehicles may require an  installation kit and/or wiring harness adapter (sold separately). Test for correct operation and slide  into mounting sleeve to secure. Snap trim ring into place.  Mount the iplug™ adapter to any smooth clean surface using the supplied double-sided tape or #2 x 3/8” Phillips head screws. TYPICAL FRONT-LOAD DIN MOUNTING METHOD 2 Free Datasheet http://www.datasheet4u.com/ XDMA7715 INSTALLATION Wiring Diagram BLACK 8-pin Female Mini-DIN BTM60 Connection (sold separately) Front Preamp Output Auxiliary Input Yellow Antenna Connector Subwoofer Preamp...