DatasheetsPDF.com

RLT915-150GS Dataheets PDF



Part Number RLT915-150GS
Manufacturers Roithner
Logo Roithner
Description Laser Diode
Datasheet RLT915-150GS DatasheetRLT915-150GS Datasheet (PDF)

RLT915-150GS TECHNICAL DATA High Power Infrared Laser Diode Lasing mode structure: single mode Lasing wavelength: typ. 915 nm Max. optical power: 150 mW Package: 9 mm (SOT-148) PIN CONNECTION: 1) Laserdiode anode 2) Laserdiode cathode and photodiode cathode 3) Photodiode anode Optical-Electrical Characteristics (Tc = 25°C) CHARACTERISTIC SYMBOL MIN Lasing Wavelength λp 910 Spectrum FWHM λf Optical Output Power Po Kink-free Power PK Threshold Current Ith Operation Current Iop Operation Voltage.

  RLT915-150GS   RLT915-150GS



Document
RLT915-150GS TECHNICAL DATA High Power Infrared Laser Diode Lasing mode structure: single mode Lasing wavelength: typ. 915 nm Max. optical power: 150 mW Package: 9 mm (SOT-148) PIN CONNECTION: 1) Laserdiode anode 2) Laserdiode cathode and photodiode cathode 3) Photodiode anode Optical-Electrical Characteristics (Tc = 25°C) CHARACTERISTIC SYMBOL MIN Lasing Wavelength λp 910 Spectrum FWHM λf Optical Output Power Po Kink-free Power PK Threshold Current Ith Operation Current Iop Operation Voltage Vop Beam Divergence Θ// Beam Divergence Θ Lifetime t 100,000 Slope Efficiency η 0.8 TYP 915 0.5 150 165 30 200 1.7 8 30 0.9 MAX 920 2 80 270 2.0 10 35 - UNIT nm nm mW mW mA mA V ° ° hour W/A 04.08.2010 rlt915_150gs.doc Free Datasheet http://www.datasheet4u.com/ 1 of 2 Absolute Maximum Ratings (Tc = 25°C) CHARACTERISTIC Operating Temperature Storage Temperature Lead Soldering Temperatur (<5sec) SYMBOL Top Tstg Tsol RATING -20 .. +50 -40 .. +80 +250° UNIT °C °C °C Safety Caution: Laser light emitted from any diode laser is invisible and may be harmful to human eye. Avoid looking directly into the diode laser aperature when the device is in operation. Note: The use of optical instruments with this product will increase eye hazard. ESD Caution Always handle diode lasers with extreme care to prevent electrostatic discharge, the primary cause of unexpected diode failure. You can prevent ESD by always wearing wrist straps, grounding all applicable work surfaces, and following extremely rigorous antistatic. Operating Considerations Operating the diode laser outside of its maximum ratings my cause device failure or a safety hazard. Power supplies used with the component must be employed such that the maximum peak optical power cannot be exceeded. CW diode lasers may be damaged by excessive drive current or switching transients. When using power supplies, the diode laser should be connected with the main power on and the output voltage at zero. The current shuould be increased slowly while monitoring the diode laser output power and the driver current. Device degradation accelerates with increased tempereature, and therefore careful attention to minimize the case temperature is advised. A proper heat sink for the diode laser on a thermal radiator will greatly enhance laser life. 04.08.2010 rlt915_150gs.doc Free Datasheet http://www.datasheet4u.com/ 2 of 2 .


RLT905-500G RLT915-150GS RLT925-5MG


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)