MMA6701EG

Freescale Semiconductor Technical Data MMA6700EG Rev 0, 09/2008 High Accuracy Low g Inertial Sensor MEMS Sensing, State Machine ASIC The MMA6700EG series is a dual axis, Low g, XY-axis sensor based on Freescale’s HARMEMS technology with an embedded DSP ASIC allowing for additional processing of the digital or analog signals. Features XY-axis of sensitivity in one device 10- or 11-bit digital data output ±3.5 g or ±5 g full-scale range per axis - MMA6700EG: ±3.5 g (11-bit data sensitivity = 3.43 mg/digit typical at 25º C) - MMA6701EG: ±5 g (11-bit data sensitivity = 4.91 mg/digit typical at 25ºC) SPI-compatible serial interface Bidirectional internal self-test On-chip temperature sensor and voltage regulator Support for signed or unsigned output data Selection of integrated signal conditioning low-pass filters Capture/hold input for system-wide synchronization support 3.3 V or 5 V single supply operation Ratiometric analog voltage output Traceability through programmable registers, 3 8-bit. Customer-assigned one-time-programmable Registers (2 8-bit Registration) Minimal external component requirements Wide operating temperature range from -40ºC to +125ºC 20-pin SOIC wide-body RoHS-compliant package Minimum external components, 4 capacitors MMA6700EG MMA6701EG DUAL AXIS LOW g INERTIAL SENSOR IMI Package SOIC-20, Tape and Reel SOIC-20, Tape and Reel SOIC-20, Tape and Reel SOIC-20, Tape and Reel NA RY N/C N/C XOUT VSSA YOUT CAP/HOLD DIN VP...