DatasheetsPDF.com

RN65E10R0BBSL88 Dataheets PDF



Part Number RN65E10R0BBSL88
Manufacturers Vishay
Logo Vishay
Description Metal Film Resistors
Datasheet RN65E10R0BBSL88 DatasheetRN65E10R0BBSL88 Datasheet (PDF)

CMF (Military RN and RL) www.vishay.com Vishay Dale Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL FEATURES • Very low noise (- 40 dB) • Very low voltage coefficient (5 ppm/V) • Controlled temperature coefficient • Flame retardant epoxy coating • Commercial alternatives to military styles are available with higher power ratings. See CMF Industrial data sheet: (www.vishay.com/doc?31018) STANDARD ELECTRICAL SPECIFICATIONS RESISTAN.

  RN65E10R0BBSL88   RN65E10R0BBSL88



Document
CMF (Military RN and RL) www.vishay.com Vishay Dale Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL FEATURES • Very low noise (- 40 dB) • Very low voltage coefficient (5 ppm/V) • Controlled temperature coefficient • Flame retardant epoxy coating • Commercial alternatives to military styles are available with higher power ratings. See CMF Industrial data sheet: (www.vishay.com/doc?31018) STANDARD ELECTRICAL SPECIFICATIONS RESISTANCE RESISTANCE RESISTANCE RANGE RANGE RESISTANCE MAX. RANGE POWER POWER MIL DIELECTRIC RANGE GLOBAL MIL    RATING RATING WORKING TOL. (3) SPEC. STRENGTH MODEL STYLE P70 °C P125 °C VOLTAGE (1) MIL-R-10509 MIL-R-10509 MIL-R-10509  ±% SHEET VAC ± 100 ppm/°C ± 50 ppm/°C ± 25 ppm/°C MIL-PRF-22684 W W V (D) (C) (E) CMF50 CMF55 CMF60 CMF65 CMF70 CMF07 CMF20 RN50 RN55 RN60 RN65 RN70 RL07 RL20 08 07 01 02 03 01 02 0.125 0.25 0.50 0.75 (2) 0.25 0.50 0.05 0.10 0.125 0.25 0.50 200 200 300 350 500 250 350 10 to 301K 10 to 1M 10 to 2M 10 to 2.49M 10 to 100K 49.9 to 100K 49.9 to 499K 49.9 to 1M 24.9 to 1M 10 to 100K 49.9 to 100K 49.9 to 499K 49.9 to 1M 24.9 to 1M 51 to 150K 4.3 to 470K 0.1, 0.25, 0.5, 1 0.1, 0.25, 0.5, 1 0.1, 0.25, 0.5, 1 0.1, 0.25, 0.5, 1 0.1, 0.25, 0.5, 1 2, 5 2, 5 450 450 500 900 900 450 700 Notes (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (2) Formerly rated at 1 W and is the direct replacement for RN70 of MIL-R-10509 rev. D. (3) Tolerances of ± 0.1 %, ± 0.25 % and ± 0.5 % are not applicable to characteristic D. TECHNICAL SPECIFICATIONS PARAMETER Voltage Coefficient Insulation Resistance Operating Temperature Range Terminal Strength Solderability UNIT ppm/V  °C Ib CONDITION 5 when measured between 10 % and full rated voltage  1010 min. dry;  108 min. after moisture test - 65/+ 175 (see derating curves for military range) 5 pound pull test for RL07/RL20; 2 pound pull test for all others Continuous satisfactory coverage when tested in accordance with MIL-R-10509 and MIL-PRF-22684 Revision: 02-May-13 Document Number: 31027 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Free Datasheet http://www.datasheet4u.com/ CMF (Military RN and RL) www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RN60D3483FR36 (preferred part numbering format) R MIL STYLE RN50 RN55 RN60 RN65 RN70 N 6 0 D 3 4 8 3 F R 3 6 PACKAGING SPECIAL CHARACTERISTIC E = 25 ppm C = 50 ppm D = 100 ppm RESISTANCE VALUE 3 digit significant figure, followed by a multiplier Use “R” for values < 100 Ω 10R0 = 10 Ω 2152 = 21.5 k Ω 2494 = 2.49 M Ω TOLERANCE CODE B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F=±1% Blank = Standard B14 = Tin/lead, bulk (Dash number) BSL = Tin/lead, bulk, 88 = Hot solder dip single lot .


RN65E10R0BBSL143 RN65E10R0BBSL88 RN65E10R0CB14143


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)