NCN5120
Transceiver for KNX Twisted Pair Networks
Introduction NCN5120 is a receiver−transmitter IC suitable for use in...
NCN5120
Transceiver for KNX Twisted Pair Networks
Introduction NCN5120 is a receiver−transmitter IC suitable for use in KNX
twisted pair networks (KNX TP1−256). It supports the connection of actuators, sensors, microcontrollers, switches or other applications in a building network.
NCN5120 handles the transmission and reception of data on the bus. It generates from the unregulated bus voltage stabilized voltages for its own power needs as well as to power external devices, for example, a microcontroller.
NCN5120 assures safe coupling to and decoupling from the bus. Bus monitoring warns the external microcontroller in case of loss of power so that critical data can be stored in time.
Key Features
9600 baud KNX Communication Speed Supervision of KNX Bus Voltage Supports Bus Current Consumption up to 13 and 26 mA Selectable KNX Bus Current (0.5 mA/ms and 1.0 mA/ms) High Efficient DC−DC Converters
♦ 3.3 V Fixed ♦ 3.3 V to 21 V Selectable
Control and Monitoring of Power
Regulators Linear 20 V
Regulator Prepared for Sleep Mode Buffering of Sent Data Frames (Extended Frames Supported) Selectable UART or SPI Interface to Host Controller Selectable UART and SPI baud Rate to Host Controller Optional CRC on UART to the Host Optional Received Frame−end with MARKER Service Optional Direct Coupling of RxD and TxD to Host (analog mode) Operates with Industry Standard Low Cost 16 MHz Quartz Generates Clock of 8 or 16 MHz for External Devices Auto Acknowledg...