austriamicrosystems AG is now
ams AG
The technical content of this austriamicrosystems datasheet is still valid.
Conta...
austriamicrosystems AG is now
ams AG
The technical content of this austriamicrosystems datasheet is still valid.
Contact information: Headquarters: ams AG Tobelbaderstrasse 30 8141 Unterpremstaetten, Austria Tel: +43 (0) 3136 500 0 e-Mail:
[email protected]
Please visit our website at www.ams.com
Free Datasheet http://www.datasheet4u.com/
AS3665
1 General Description
The AS3665 is a capacitive low noise charge pump with 9 current sources. The charge pump automatically switches between 1:1 and 1:1.5 modes. The connected current sources have a very low voltage compliance to improve efficiency of the whole system. Three current sources have the possibility to operate either from VBAT or VCP (especially useful for red LEDs). The internal control is done by command based pattern generators implemented by three sequencers. These commands are optimized for lighting applications (e.g. ramp up brightness logarithmically). It includes high level commands like conditionals jumps and variables. Any of the three sequencers can be dynamically mapped to any of the 9 PWM generators for the LEDs. The AS3665 supports an audio input and sophisticated light patterns can be controlled by internal digital filters.
2
Datasheet, Confidential
9 Channel Advanced Command Driven RGB/White LED Driver
2 Key Features
High efficiency capacitive 150mA charge pump with 1:1, 1:1.5 and 1:2 modes with automatic mode switching; 1:2 mode can be disabled 9 Channel High Side 20mA Current sources - Less than ...