Dual 3A Low Quiescent Current High Efficiency Synchronous Buck Regulator
|Total Page||18 Pages|
|Features||Datasheet pdf Dual 3A Low Quiescent Current High Effic iency Synchronous Buck Regulator ISL803 3, ISL8033A ISL8033 is a dual integrate d power controller rated for 3A per cha nnel with a 1MHz step-down regulator th at is ideal for any low power low-volta ge applications. The ISL8033A offers 2. 5MHz operation for smaller more compact ed design. The channels are 180° out-o f-phase for input RMS current and EMI r eduction. It is optimized for generatin g low output voltages down to 0.8V each . The supply voltage range is from 2.85 V to 6V, allowing for the use of a sing le Li+ cell, three NiMH cells or a regu lated 5V input. It has a guaranteed min imum output current of 3A each when ISE T is connected to VDD. The output cur.|
|Keywords||ISL8033A, datasheet, pdf, Intersil, Dual, 3A, Low, Quiescent, Current, High, Efficiency, Synchronous, Buck, Regulator, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent|
Dual 3A Low Quiescent Current High Efficiency
Synchronous Buck Regulator
ISL8033 is a dual integrated power controller rated for 3A per
channel with a 1MHz step-down regulator that is ideal for any low
power low-voltage applications. The ISL8033A offers 2.5MHz
operation for smaller more compacted design. The channels are
180° out-of-phase for input RMS current and EMI reduction. It is
optimized for generating low output voltages down to 0.8V each.
The supply voltage range is from 2.85V to 6V, allowing for the use
of a single Li+ cell, three NiMH cells or a regulated 5V input. It
has a guaranteed minimum output current of 3A each when ISET
is connected to VDD. The output current of each output is
selectable by setting ISET pin.
The ISL8033, ISL8033A includes a pair of low ON-resistance
P-Channel and N-Channel internal MOSFETs to maximize
efficiency and minimize external component count. 100% duty-
cycle operation allows less than 250mV dropout voltage at 3A.
The ISL8033, ISL8033A offers an independent 1ms Power-Good
(PG) timer at power-up. When shutdown, ISL8033, ISL8033A
discharges the output capacitor. Other features include internal
digital soft-start, enable for power sequence, controllable soft-
stop output discharge during disabled, start-up with pre-biased
output, 100% maximum duty cycle for lowest dropout, 100%
duty cycle operation for smooth transition, less than 8µA logic
controlled shutdown current, independent enable, overcurrent
protection, and thermal shutdown.
The ISL8033, ISL8033A is offered in a 24 Ld 4mmx4mm QFN
package with 1mm maximum height. The complete converter
occupies less than 5.46cm2 area.
• Dual 3A High Efficiency Synchronous Buck Regulator with up
to 95% Efficiency
• 2% Output Accuracy Over-Temperature/Load/Line
• Internal Digital Soft-Start - 1.5ms
• External Synchronization up to 6MHz (ISL8033)
• Internal Current Mode Compensation
• Peak Current Limiting and Hiccup Mode Short Circuit
• Adjustable Peak Overload Current
• Negative Current Protection
• Pb-Free (RoHS Compliant)
• DC/DC POL Modules
• µC/µP, FPGA and DSP Power
• Plug-in DC/DC Modules for Routers and Switchers
• Test and Measurement Systems
• Li-ion Battery Power Devices
• Bar Code Readers
• See AN1606, ISL8033EVAL1Z Application Note
• See AN1611, ISL8033EVAL2Z Application Note
VIN = 5V
0.5 1.0 1.5 2.0
FIGURE 1. EFFICIENCY vs LOAD
March 24, 2011
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 |Copyright Intersil Americas Inc. 2010, 2011. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
Free Datasheet http://www.datasheet4u.com/