DatasheetsPDF.com

WEH000802ALPP5N Dataheets PDF



Part Number WEH000802ALPP5N
Manufacturers Winstar
Logo Winstar
Description OLED
Datasheet WEH000802ALPP5N DatasheetWEH000802ALPP5N Datasheet (PDF)

OLED SPECIFICATION Model No: WEH000802ALPP5N00000 -1- Free Datasheet http://www.datasheet4u.com/ 5 6 6 7 7 8 9 11 24 28 29 32 51 52 54 60 -2- Free Datasheet http://www.datasheet4u.com/ SPECIFICATION CUSTOMER : Version: A MODULE NO. : APPROVED BY: WEH000802ALPP5N00000 ( FOR CUSTOMER USE ONLY ) SALES BY APPROVED BY CHECKED BY PREPARED BY ISSUED DATE: -3- Free Datasheet http://www.datasheet4u.com/ MODLE NO: RECORDS OF REVISION VERSION DATE DOC. FIRST ISSUE REVISED SUMMARY PAGE.

  WEH000802ALPP5N   WEH000802ALPP5N


Document
OLED SPECIFICATION Model No: WEH000802ALPP5N00000 -1- Free Datasheet http://www.datasheet4u.com/ 5 6 6 7 7 8 9 11 24 28 29 32 51 52 54 60 -2- Free Datasheet http://www.datasheet4u.com/ SPECIFICATION CUSTOMER : Version: A MODULE NO. : APPROVED BY: WEH000802ALPP5N00000 ( FOR CUSTOMER USE ONLY ) SALES BY APPROVED BY CHECKED BY PREPARED BY ISSUED DATE: -3- Free Datasheet http://www.datasheet4u.com/ MODLE NO: RECORDS OF REVISION VERSION DATE DOC. FIRST ISSUE REVISED SUMMARY PAGE NO. 10 First issue 68 series only 0 A 2010/11/18 2010.12.20 -4- Free Datasheet http://www.datasheet4u.com/ 1. Module Classification Information W E H 000802 A L P P 5 N 00000 1 ○ 2 ○ 3 ○ 4 ○ 5 ○ 6 ○ 7 ○ 8 ⑨ ○ ⑩ ⑪ 1 2 3 4 5 Brand:WINSTAR DISPLAY CORPORATION E:OLED Display Type:H→Character Type, G→Graphic Type Number of dots: Serials code A:Amber B:Blue 6 Emitting Color G:Green Y:Yellow Green 7 8 9 10 11 Polarizer Display Mode Driver Voltage Touch Panel Serial No. R:RED C:Full color W:White L:Yellow 8 characters, 2Lines. P:With Polarizer; N: Without Polarizer P:Passive Matrix ; A: Active Matrix 3: 3.0 V; 5: 5.0V N:Without touch panel; T: With touch panel 00000: Sales code -5- Free Datasheet http://www.datasheet4u.com/ 2. General Specification Item Number of Characters Module dimension View area Active area Dot size Dot pitch Character size Character pitch LCD type Duty Dimension 8 characters x 2 Lines 58.0 x 32.0 x 10.0(MAX) 38.0 x 16.0 28.16 x 11.86 0.56 x 0.66 0.60x 0.70 2.96 x 5.56 3.6 x 6.3 OLED , Yellow 1/16 Unit - mm mm mm mm mm mm mm 3. Absolute Maximum Ratings Item Operating Temperature Storage Temperature Input Voltage Supply Voltage For Logic Symbol TOP TST VI VDD-VSS Min -40 -40 -0.3 -0.3 Max +80 +80 VDD 5.3 Unit ℃ ℃ V V Notes -6- Free Datasheet http://www.datasheet4u.com/ 4. Electrical Characteristicsical Item Supply Voltage For Logic Input High Volt. Input Low Volt. Output High Volt. Output Low Volt. Supply Current CIEx(Yellow) CIEy(Yellow) Symbol VDD-VSS VIH VIL VOH VOL IDD Condition - - - IOH=-0.5mA IOL=0.5mA VDD=5V x,y(CIE1931) x,y(CIE1931) Min 3.0 0.9 VDD GND 0.8 VDD GND - 0.44 0.46 Typ 5.0 - - - - 16 0.48 0.50 Max 5.3 VDD Unit V V 0.1VDD V VDD V 0.2 VDD V - 0.52 0.54 mA 5. Optical Characteristics Item View Angle Contrast Ratio Response Time Symbol (V)θ (H)φ CR T rise T fall Dark - - With polarizer With polarizer Condition Min 160 160 2000:1 10 10 125 175 - Typ Max Unit deg deg - µs µs nits nits Supply Voltage For Logic 5V 50% CheckBoard Brightness Supply Voltage For Logic 3V 50% CheckBoard Brightness \\ -7- Free Datasheet http://www.datasheet4u.com/ 6. Interface Pin Function Pin No. Symbol 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 VSS VDD NC RS R/W E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 NC NC Level 0V 5.0V - H/L H/L H,H→L H/L H/L H/L H/L H/L H/L H/L H/L - - H: DATA, L: Instruction code H: Read(MPU→Module) L: Write(MPU→Module) Chip enable signal Data bit 0 Data bit 1 Data bit 2 Data bit 3 Data bit 4 Data bit 5 Data bit 6 Data bit 7 Description Ground Supply Voltage for logic ※Brightness Control Brightness(nits) Power consumption(measured with random texts) 125(typical) 80mW(5V*16mA) Notes: 1.When random texts pattern is running , averagely , at any instance , about 1/2 of pixels will be on. 2. You can to use the display off mode to make long life. -8- Free Datasheet http://www.datasheet4u.com/ 7. Counter Drawing & Block Diagram 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Vss Vdd NC RS R/W E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 NC NC 4.4 8.0 10.07 2.5 7.4 10.0 14.62 1.3 58.0 0.5 43.2 38.0(VA) 28.16(AA) 10.0 max 4.5 16 15 32.0 0.5 23.1 16.0(VA) 11.86(AA) 0.8 2 1 29.0 2.5 53.0 27.0 4- 2.5 PTH 4- 5.0 PAD 1.6 3.6 2.96 0.6 0.56 6.3 5.56 0.7 0.66 The non-specified tolerance of dimension is ∮ 0.3 mm . DOT SIZES SCALE 5/1 -9- Free Datasheet http://www.datasheet4u.com/ - 10 - Free Datasheet http://www.datasheet4u.com/ 8. Function Description REGISTERS IC provides two types of 8-bit registers, namely: Instruction Register (IR) and Data Register (DR). The register is selected using the RS Pin. When the RS pin is set to "0", the Instruction Register Type is selected. When RS pin is set to "1", the Data Register Type is selected. Please refer to the table below. RS 0 0 1 1 R/WB 0 1 0 1 Operation Instruction register write as an internal operation. Read busy flag (DB7) and address counter (DB0 to DB6) Data register write as an internal operation (DR to DDRAM or CGRAM) Data register read as an internal operation (DDRAM or CGRAM to DR) INSTRUCTION REGISTER (IR) The Instruction Register is used to store the instruction code (i.e. Display Clear, Cursor Home and others), Display Data RAM (DDRAM) Address, and the Character Generator RAM (CGRAM) Address. Instruction register can only be written from the MPU. DATA REGISTER (DR) The Data Register is used as a temporary storage for data that are going to be written into the DDRAM or CGRAM as well as those data that are going to be read from the D.


WEH002002ALPP5N WEH000802ALPP5N WEH001202ALPP5N


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)