DatasheetsPDF.com

I2501-6IGN9624B Dataheets PDF



Part Number I2501-6IGN9624B
Manufacturers Illuminant
Logo Illuminant
Description LCM
Datasheet I2501-6IGN9624B DatasheetI2501-6IGN9624B Datasheet (PDF)

ILLUMINANT PRODUCT SPECIFICATION FOR LCM CUSTOMER: MODEL NO: ACCEPTED BY: I2501-6IGN9624B APPROVED BY: 2009.01.25 l CHECKED BY: 2009.01.25 Vicky ORGANIZED BY: 2009.01.25 Vicky Long ▓ Approval for Specifications Only □ Approval for Specifications and Sample Note: 1. Version of Specifications : 1 2. Others: Rohs Compliment TAIWAN 1F, #15, LANE 75, MIN CHUAN E. RD., SEC 3, TAIPEI, TAIWAN. Tel +886-2-25175115 CHINA 5F DONGWU COMMERICAL BLDG., LANSHAN RD., NORTH DISTRICT, HI-TECH INDUSTRIAL PA.

  I2501-6IGN9624B   I2501-6IGN9624B


Document
ILLUMINANT PRODUCT SPECIFICATION FOR LCM CUSTOMER: MODEL NO: ACCEPTED BY: I2501-6IGN9624B APPROVED BY: 2009.01.25 l CHECKED BY: 2009.01.25 Vicky ORGANIZED BY: 2009.01.25 Vicky Long ▓ Approval for Specifications Only □ Approval for Specifications and Sample Note: 1. Version of Specifications : 1 2. Others: Rohs Compliment TAIWAN 1F, #15, LANE 75, MIN CHUAN E. RD., SEC 3, TAIPEI, TAIWAN. Tel +886-2-25175115 CHINA 5F DONGWU COMMERICAL BLDG., LANSHAN RD., NORTH DISTRICT, HI-TECH INDUSTRIAL PARK, SHENZHEN, PRC. TEL + 86-755-86154466 KOREA RM 1201, IT MIRAE TOWER, 60-21, GASAN-DONG, GEUMCHEON-GU, SEOUL, 153-801, KOREA TEL + 82-2-2027-5391~2 FAX +82-2-2027-5393 FAX +86-755-86154366 Fax +886-2-25175099 Free Datasheet http://www.datasheet4u.com/ ILLUMINANT Version 1 Date 09/01/25 Contents Initial Release I2501-6IGN9624B 2/45 Free Datasheet http://www.datasheet4u.com/ ILLUMINANT CONTENTS 1. Mechanical Specification 2. Maximum Ratings 3. Electrical Characteristics 4. Optical Characteristics 5. Interface 6. Timing Characteristics 7. Power On/Off Sequence 8. Block Diagram 9. Backlight 10. Reliability I2501-6IGN9624B 3/45 Free Datasheet http://www.datasheet4u.com/ ILLUMINANT 1. Mechanical Specification Item Display Size Module Dimension Active Area Number of Dots Surface Treatment Display Mode Viewing Direction Approx. Weight Various Color Display Brightness Backlight Type Backlight Color Standard Value 2.5 43.3(W)*60.6(H)*2.70(D) 37.44(W)*49.92(H) 960(RGB)*240 Delta Type Clear Transmissive Type, Positive Mode 6H TBD 16.7M Color 250 2-LED Serial White Unit inch mm mm Dot g cd/m2 I2501-6IGN9624B 4/45 Free Datasheet http://www.datasheet4u.com/ ILLUMINANT I2501-6IGN9624B 5/45 Free Datasheet http://www.datasheet4u.com/ ILLUMINANT 2. Maximum Ratings If the operating condition exceeds the following absolute maximum ratings, the TFT LCD module may be damaged permanently. PGND=VSS=0V, Ta=25℃ Values Item Symbol Unit Condition Min. Max. VDD Power Voltage PVDD Input Signal Voltage Digital Input Voltage Storage Temperature VCOM VIN TST TOP Fmax -0.5 -2.9 -0.3 -25 3.6 5.2 VDD+0.3 80 V V V ℃ ℃ MHZ %RH Note1 -0.5 3.6 V Operating Temperature Maximum Clock Frequency Humidity Note1 : TA≤40℃ without dewing 0 -- 60 30 90 I2501-6IGN9624B 6/45 Free Datasheet http://www.datasheet4u.com/ ILLUMINANT 3. Electrical Characteristics a. Typical Operating Conditions Item Supply Voltage for Source Driver Supply Voltage for Gate Driver Symbol VDD PVDD H Level L Level H Level L Level H Level L Level VGH VGL VIH VIL VOH VOL VCOMAC VCOMDC Min. 3.0 3.0 14 -7.5 VDD-0.4 0 0.7VDD 0 Values Typ. 3.3 3.3 16 -6 +4.5 0.24 Max. 3.6 3.6 19.5 -4 VDD VDD+0.4 VDD 0.3VDD +4.8 V V V V V V Vp-p AC Component of VCOM Uni t V Remark Note3-1 Note3-1 Digital Input Voltage Digital Output Voltage VCOM V Note 3-1 : VGH and VGL supplied by internal setup circuit. b. Current Consumption Parameter Current for FOG Current for LCM Symbol IDD PIDD Condition VDD=+3.3V PVDD1=+3.3V Typ. 6.2 35.0 Max. 12.4 70.0 Unit mA mA Remark Note1 Note2 Note 1: FOG means LCM without B/L unit Note 2: The test conditions is by reference application note as below I2501-6IGN9624B 7/45 Free Datasheet http://www.datasheet4u.com/ ILLUMINANT 4. Optical Characteristics The following items are measured under stable conditions. The optical characteristics should be measured in a dark room or equivalent state with the methods shown in Note1,2,3. Item Response Time Symbol TR TF CR Top Bottom Left Right X Y Condition ࣂ =0 At optimized viewing angle Min 200 Typ 20 10 300 Max 30 15 Unit ms ms Remark Note 4,6 Contrast Ratio Note 5,6 Viewing Angle Hor. Ver. CR≧10 White Chromaticity Shift Brightness ࣂ =0 ࣂ =0 40 45 20 55 Degree Note 6,7 45 65 45 65 (0.26) (0.31) (0.36) (0.28) (0.33) (0.38) 200 250 Cd/m2 Note 1 : Ambient temperature =25℃ Note 2 : To be measured in the dark room. Note 3 : To be measured on the center area of panel with a field angle of 1℃ by Topcon luminance meter BM-7, after 10minutes operation. Note 4 : Definition of Response time The output signals of photo detector are measured when the input signals are changed from “ black” to “white” (falling time) and from “white” to “black” (rising time), respectively. The response time is defined as the time interval between the 10% and 90% of amplitudes. Refer to figure as below. I2501-6IGN9624B 8/45 Free Datasheet http://www.datasheet4u.com/ ILLUMINANT Note 5 : Definition of Contrast Ratio Contrast Ratio is calculated with the following formula. Contrast Ratio (CR) = Brightness measured when LCD is at “white state” Brightness measured when LCD is at “black state” Note 6 : White Vi=Vi50 +1.5V Black Vi=Vi50 ± 2.0V “±”means that the analog input signal swings in phase with COM signal. “+” means that the analog input signal swings out of phase with COM signal. Vi50 : The analog input voltage when transmission is 50%. The 100% transmission is defined as the transmission of LCD panel when all the input te.


I2420-6OMN4823A I2501-6IGN9624B I2812-7IPT2432A


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)