DatasheetsPDF.com

1N3041B-1 Dataheets PDF



Part Number 1N3041B-1
Manufacturers Microsemi
Logo Microsemi
Description (1N3016B-1 - 1N3045B-1) 1 Watt Glass Case Zener Diodes
Datasheet 1N3041B-1 Datasheet1N3041B-1 Datasheet (PDF)

1N3016B-1 – 1N3045B-1 Qualified Levels: JAN, JANTX, and JANTXV Available on commercial versions 1 Watt Glass Case Zener Diodes Qualified per MIL-PRF-19500/115 DESCRIPTION This well established Zener diode series for the 1N3016B-1 through 1N3045B-1 JEDEC registration in the glass DO-41 package provides a glass hermetic seal for 6.8 to 110 volts. It is also well suited for high-reliability applications where it is available in JAN, JANTX, and JANTXV military qualifications. Lower voltages are a.

  1N3041B-1   1N3041B-1


Document
1N3016B-1 – 1N3045B-1 Qualified Levels: JAN, JANTX, and JANTXV Available on commercial versions 1 Watt Glass Case Zener Diodes Qualified per MIL-PRF-19500/115 DESCRIPTION This well established Zener diode series for the 1N3016B-1 through 1N3045B-1 JEDEC registration in the glass DO-41 package provides a glass hermetic seal for 6.8 to 110 volts. It is also well suited for high-reliability applications where it is available in JAN, JANTX, and JANTXV military qualifications. Lower voltages are also available in the 1N3821 through 1N3828 series (3.3 V to 7.5 V) in the same package (see separate data sheet). Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • • • • • • • • JEDEC registered 1N3016 through 1N3045 numbers. Zener voltage range: 6.8 volts to 110 volts. Hermetically sealed DO-41 glass package. Metallurgically bonded. Double plug construction. Voltage tolerances of 5%, 2%, and 1% available. JAN, JANTX, and JANTXV qualifications also available per MIL-PRF-19500/115. (See part nomenclature for all available options.) RoHS compliant versions available (commercial grade only). DO-41 Package Also available in: DO-213AB package (surface mount) 1N3016BUR-1 – 1N3045BUR-1 APPLICATIONS / BENEFITS • • • • • Regulates voltage over a broad operating current and temperature range. Wide selection from 6.8 to 110 volts. Low reverse (leakage) currents. Non-sensitive to ESD. Inherently radiation hard as described in Microsemi “MicroNote 050”. MAXIMUM RATINGS Parameters/Test Conditions Junction and Storage Temperature (1) Thermal Resistance Junction-to-Lead (2) DC Power Dissipation Forward Voltage @ 200 mA Solder Temperature @ 10 s Symbol TJ and TSTG R ӨJL PD VF TSP Value -55 to +175 80 1.0 1.2 260 Unit ºC ºC/W W V o C MSC – Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com Notes: 1. At L = 0.375 inches (10 mm) from body. 2. At T L < +95 oC 3/8” (10 mm) from body or 1.0 watts at T L < +65 oC when mounted on FR4 PC board as described for thermal resistance above (also see Figure 1). (Derate power to 0 at T L = +175 °C). T4-LDS-0285, Rev. 1 (121794) ©2013 Microsemi Corporation Page 1 of 5 Free Datasheet http://www.datasheet4u.com/ 1N3016B-1 – 1N3045B-1 MECHANICAL and PACKAGING • • • • • • • CASE: Hermetically sealed voidless hard glass with tungsten slugs. TERMINALS: Tin/lead or RoHS compliant matte/tin (commercial grade only) over copper. MARKING: Body coated in blue with part number. POLARITY: Cathode indicated by band. TAPE & REEL option: Standard per EIA-296. Consult factory for quantities. WEIGHT: 340 milligrams. See Package Dimensions on last page. PART NOMENCLATURE JAN Reliability Level JAN = JAN level JANTX = JANTX level JANTXV = JANTXV level Blank = Commercial JEDEC type number (See Electrical Characteristics table) Zener Voltage Tolerance B = 5% C = 2% D = 1% 1N3016 B -1 e3 RoHS Compliance e3 = RoHS compliant (available on commercial grade only) Blank = non-RoHS compliant Metallurgically Bonded DO-41 Symbol IR I Z, I ZT, I ZK I ZM VF VR VZ Z ZT or Z ZK SYMBOLS & DEFINITIONS Definition Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature. Regulator Current: The dc regulator current (I Z), at a specified test point (I ZT), near breakdown knee (I ZK ). Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating. Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current. Reverse Voltage: The reverse voltage dc value, no alternating component. Zener Voltage: The Zener voltage the device will exhibit at a specified current (I Z) in its breakdown region. Dynamic Impedance: The small signal impedance of the diode when biased to operate in its breakdown region at a specified rms current modulation (typically 10% of I ZT or I ZK ) and superimposed on I ZT or I ZK respectively. T4-LDS-0285, Rev. 1 (121794) ©2013 Microsemi Corporation Page 2 of 5 Free Datasheet http://www.datasheet4u.com/ 1N3016B-1 – 1N3045B-1 *ELECTRICAL CHARACTERISTICS @ 25°C NOMINAL ZENER VOLTAGE V Z @ I ZT (Note 1) Volts 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 ZENER TEST CURRENT I ZT mA 37 34 31 28 25 23 21 19 17 15.5 14 12.5 11.5 10.5 9.5 8.5 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.7 3.3 3.0 2.8 2.5 2.3 MAXIMUM ZENER IMPEDANCE (Note 3) MAXIMUM ZENER CURRENT I ZM (Note 3) mA 140 125 115 105 95 85 80 74 63 60 52 47 43 40 34 31 28 26 23 21 19 18 17 15 14 12 11 10 9.0 8.3 MAXIMUM REVERSE LEAKAGE CURRENT† IR @ V R Volts µA 150 5.2 100 5.7 50 6.2 25 6.9 25 7.6 10 8.4 10 9.1 10 9.9 10 11.4 10 12.2 10 13.7 10 15.2 10 16.7 10 18.2 10 20.6 10 22.8 10 25.1 10 27.4 10 29.7 10 32.7 10 35.8 10 38.8 10 42.6 10 47.1 10 51.7 10 56..


1N3040B-1 1N3041B-1 1N3042B-1


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)