USB TO FULL HANDSHAKE UART
FT231X USB TO FULL HANDSHAKE UART IC Datasheet
Version 1.4
Document No.: FT_000565 Clearance No.: FTDI# 261
Future Tech...
Description
FT231X USB TO FULL HANDSHAKE UART IC Datasheet
Version 1.4
Document No.: FT_000565 Clearance No.: FTDI# 261
Future Technology Devices International Ltd.
FT231X
(USB to FULL HANDSHAKE UART IC)
The FT231X is a USB to serial UART interface with full modem control and the following
advanced features:
Single chip USB to asynchronous serial data
transfer interface.
Entire USB protocol handled on the chip. No USB specific firmware programming required.
Fully integrated 2048 byte multi-time-
programmable (MTP) memory, storing device
descriptors and CBUS I/O configuration.
Fully integrated clock generation with no external crystal required plus optional clock
output selection enabling a glue-less interface
to external MCU or FPGA.
Data transfer rates from 300 baud to 3 Mbaud
(RS422, RS485, and RS232) at TTL levels.
512 byte receive buffer and 512 byte transmit buffer utilising buffer smoothing technology to
allow for high data throughput.
FTDI’s royalty-free Virtual Com Port (VCP)
and Direct (D2XX) drivers eliminate the requirement for USB driver development in
most cases.
Configurable CBUS I/O pins.
Transmit and receive LED drive signals.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space
no parity
Synchronous and asynchronous bit bang interface options with RD# and WR# strobes.
USB Battery Charger Detection. Allows for USB peripheral devices to detect the presence of a...
Similar Datasheet