Product specification
KE183W thru KE253W
SOD-123
+0.1 2.7-0.1 +0.1 0.55-0.1
Unit: mm
+0.05 1.1-0.05
Features
Metal si...
Product specification
KE183W thru KE253W
SOD-123
+0.1 2.7-0.1 +0.1 0.55-0.1
Unit: mm
+0.05 1.1-0.05
Features
Metal silicon junction,majority carrier conduction Low power loss,high efficiency
0.50
+0.1 3.7-0.1
0.1max
0.35
Absolute Maximum Ratings Ta = 25
Parameter
Regulator current at specified test Knee impedance Test Voltageat I=0.8 IP Peak Operating Voltage A 90Hz signal VK with RMS value equal to 10% of test voltage ,VK,is superimposed on VK:RK=VK/ik DC Power Operating junction temperature range Storage temperature range Typical temperature coefficient Symbol IP VK VBO RDK PD TJ TSTG TC
-0.20 to -0.15
KE183W 18
KE203W 20 3.0 100.0
KE223W 22
KE253W 23
+0.05 0.1-0.02
Unit mA V V Ohm W
10 to 300 1.0 -50 to +150 -50 to +150
-0.20 to -0.32 -0.23 to -0.32 -0.23 to -0.35
%/
Note1:Field-effect current
regulator diodes are circuit elements that provide a currentessentially independent of voltage, These diodes are especially designed for maximum impedance over the operating range. These devices may be used in parallel to obtain higher currents Note2:Generally ip indicate 10% tolerance;suffix:"A" indicate 5% tolerance
http://www.twtysemi.com
[email protected]
4008-318-123
1 of 1
Free Datasheet http://www.datasheet4u.com/
+0.1 1.6-0.1
...