Basic LED Driver
LITIX™ Basic
TLD1124EL 1 Channel High-Side Current Source
Package PG-SSOP-14 Marking TLD1124
Cmod=2.2µF CVS =4.7nF VS ...
Description
LITIX™ Basic
TLD1124EL 1 Channel High-Side Current Source
Package PG-SSOP-14 Marking TLD1124
Cmod=2.2µF CVS =4.7nF VS 4.7nF**
1 Overview
Applications Exterior LED lighting applications such as tail/brake light, turn indicator,
position light, side marker,... Interior LED lighting applications such as ambient lighting, interior
illumination and dash board lighting.
VBATT
GND
IS O-Pu lse protection circuit depending on req uire ment s
Internal supply
The rm a l protection
DEN
Diagnosis en ab le
IN_SET Current ad justm en t
TLD1124EL
Output control
St atus
OUT
RSET 470kΩ*
ST CST =10 0pF **
GND
* In case PWM via VS is performed ** For EMI improvement if required
Application Diagram with TLD1124EL
to other LITIX™ Basic
Data Sheet
www.infineon.com
Rev. 1.2 2018-04-26
LITIX™ Basic
TLD1124EL
Overview
Basic Features
1 Channel device with integrated output stage (current source), optimized to drive LEDs with output current up to 360 mA
Low current consumption
PWM-operation supported via VS-pin
Output current adjustable via external low power resistor and possibility to connect PTC resistor for LED protection during over temperature conditions
Reverse polarity protection and overload protection
Undervoltage detection
Open load and short circuit to GND diagnosis
Wide temperature range: -40°C < Tj < 150°C PG-SSOP-14 package with exposed heatslug
Description
The LITIX™ Basic TLD1124EL is a one channel high side driver IC with integrated output stage...
Similar Datasheet