DA01S Series
1W DC/DC CONVERTER, DIP-Package, High Isolation
FEATURES
Efficiency up to 79% DIP Package with Industry Standard Pinout High Isolation Voltage 3000VDC Temperature Performance -40℃ to +75℃ > 2MHours MTBF Internal SMD platform Lead free, RoHs Compliant 12 Standard Models 3 Years Product Warranty
The DA01S series are miniature, DIP Package, isolated 1W DC/DC converters with 3,000VDC isolation. It allows a wide operating temperature range of –40°C to +75°C. These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions.
Model List
Model Number Input Voltage (Range) Output Voltage Output Current Input Current Load Regulation Max. apacitive Load Efficiency (typ.) @Max. Load % (max.) 11 8 7 6 9 5 5 4 8 5 4 4 uF % 69 76 77 78 71 77 79 79 70 76 79 79
Max. VDC 5 9 12 15 5 9 12 15 5 9 12 15 mA 200 110 84 67 200 110 84 67 200 110 84 67
Min. mA 4 2 1.5 1 4 2 1.5 1 4 2 1.5 1
@Max. Load @No Load mA(typ.) 290 260 262 257 117 107 106 106 60 54 53 53 mA(typ.)
VDC DA01S0505A DA01S0509A 5 DA01S0512A (4.5 ~ 5.5) DA01S0515A DA01S1205A DA01S1209A 12 DA01S1212A (10.8 ~ 13.2) DA01S1215A DA01S2405A DA01S2409A 24 DA01S2412A (21.6 ~ 26.4) DA01S2415A
30
33
13
33
10
33
Input Characteristics
Parameter Input Voltage Range Model 5V Input Models 12V Input Models 24V Input Models 5V Input Models Input Surge Voltage (1 sec. max.) Reverse Polarity Input Current Input Filter Internal Power Dissipation All Models --12V Input Models 24V Input Models Min. 4.5 10.8 21.6 -0.7 -0.7 -0.7 --Typ. 5 12 24 ----------Max. 5.5 13.2 26.4 7 15 28 0.3 450 A mW VDC Unit
Internal Capacitor
DS_DA01S_03152012
E-mail:
[email protected] http://www.delta.com.tw/dcdc
P1
Free Datasheet http://www.datasheet4u.com/
Output Characteristics
Parameter Output Voltage Accuracy Line Regulation Load Regulation Ripple & Noise (20MHz) Ripple & Noise (20MHz) Ripple & Noise (20MHz) Temperature Coefficient Short Circuit Protection Over Line, Load & Temp. For Vin Change of 1% Io=20% to 100% --------100 ----±0.01 Conditions Min. ----Typ. ±1.0 ±1.2 +-11% max 150 200 15 ±0.02 mV P-P mV P-P mV rms %/℃ Max. ±3.0 ±1.5 Unit % %
0.5 Second Max.
General Characteristics
Parameter I/O Isolation Voltage (rated) I/O Isolation Resistance I/O Isolation Capacitance Switching Frequency MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign Conditions 60 Seconds 500 VDC 100KHz, 1V Min. 3000 10 --50 2,000,000 Typ. ----60 90 --Max. ----100 110 --Unit VDC GΩ pF KHz Hours
Recommended Input Fuse
5V Input Models 500mA Slow-Blow Type 12V Input Models 200mA Slow-Blow Type 24V Input Models 100mA Slow-Blow Type
Environmental Characteristics
Parameter Operating Temperature Range (with Derating) Case Temperature Storage Temperature Range Humidity (non condensing) Cooling Lead Temperature (1.5mm from case for 10Sec.) Conditions Ambient Min. Max. -40 +85 --+90 -50 +125 --95 Free-Air convection --260 Unit ℃ ℃ ℃ % rel. H ℃
Power Derating Curve
Output Power (%)
(5V Output Only)
Output Power (%)
(All Other Output)
Notes
1 2 3 4 5 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. Ripple & Noise measurement bandwidth is 0-20MHz. These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. All DC/DC converters should be externally fused at the front end for protection. Specifications subject to change without notice.
DS_DA01S_03152012
E-mail:
[email protected] http://www.delta.com.tw/dcdc
P2
Free Datasheet http://www.datasheet4u.com/
Package Specifications
Mechanical Dimensions
0.4 [0.02]
Pin Connections Pin 1
L
Function -Vin +Vin +Vout -Vout
4
3.1 [0.12]
5 7
2.54 [0.10] 7.62 [0.30]
0.50 [0.02] 2.6 [0.10]
L=7.0 [0.28] for 5V & 12V Input Models L=8.0 [0.31] for 24V Input Models
Bottom View
7 5
7.62 [0.30]
10.2 [0.40]
1
4
►All dimensions in mm
(inches)
1.29 [0.05]
5.08 [0.20] 12.7 [0.50]
►Tolerance: X.X±0.25
(X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
►Pin
diameter ⇔ 0.5 ±0.05 (0.02±0.002)
Physical Characteristics
Case Size (5V&12V Input) Case Size(24V Input) Case Material Weight(5V&12V Input) Weight(24V Input) : : : : : 12.7x7.0x10.2mm (0.50x0.28x0.40 Inches) 12.7x8.0x10.2mm (0.50x0.31x0.40 Inches) Non-Conductive Black Plastic (flammability to UL 94V-0 rated) 1.3g 1.7g
DS_DA01S_03152012
E-mail:
[email protected] http://www.delta.com.tw/dcdc
P3
Free Datasheet http://www.datasheet4u.com/
Part Numbering System
D Form factor D-DIP P-SIP S-SMD A Family series A~Z 01 Watt 01:1W 02:2W 03:3W 04:4W 06:6W S Number of Outputs S - Singl.