Quad High Side Switch
Freescale Semiconductor Advance Information
Document Number: MC10XSC425 Rev. 2.0, 9/2013
Quad High Side Switch (Dua...
Description
Freescale Semiconductor Advance Information
Document Number: MC10XSC425 Rev. 2.0, 9/2013
Quad High Side Switch (Dual 10 mOhm, Dual 25 mOhm)
The 10XSC425 is one in a family of devices designed for low-voltage lighting or factory automation applications. Its four low RDS(ON) MOSFETs (dual 10 m/dual 25 m) can control four separate 55 W / 28 W bulbs, and/or Xenon modules, and/or LEDs, and/or DC low voltage motors. Programming, control and diagnostics are accomplished using a 16-bit SPI interface. Its output with selectable slew-rate improves electromagnetic compatibility (EMC) behavior. Additionally, each output has its own parallel input or SPI control for pulse-width modulation (PWM) control if desired. The 10XSC425 allows the user to program via the SPI the fault current trip levels and duration of acceptable inrush. The device has fail-safe mode to provide fail-safe functionality of the outputs in case of MCU damaged. This device is powered by SMARTMOS technology. Features Four protected 10 m and 25 m high side switches (at 25 °C) Operating voltage range of 6.0 to 20 V with sleep current < 5.0 A, extended mode from 4.0 to 28 V 8.0 MHz 16-bit 3.3 V and 5.0 V SPI control and status reporting with daisy chain capability PWM module using external clock or calibratable internal oscillator with programmable output delay management Smart overcurrent shutdown, severe short-circuit, overtemperature protections with time limited autoretry, and failsafe mode, in ca...
Similar Datasheet