Document
KMH SERIES
KMH Series
Ⅲ
Engineering Bulletin Mar 07
Snap Mount Ⅲ Large Capacitance Ⅲ High CV Ⅲ High Ripple Ⅲ RoHS Compliant Ⅲ 105؇C Maximum Temperature
The KMH series capacitors are the standard 105؇ C , large capacitance, snap-in capacitors from United Chemi-Con. The load life for the KMH series is 2,000 hours at 105؇ C with the rated ripple current applied. The very high CV values and ripple current capabilities make these capacitors ideal for use in power supply filter circuits. The KMH capacitors are available in 2 or 4-pin snap-in styles and 4 or 5-pin straight terminals. The KMH series is RoHS compliant offering Pb-free construction. The standard KMH series capacitors are not solvent proof. Refer to guidelines and precautions on the website for usage and installation conditions recommended for United Chemi-Con products.
SNAP MOUNT 105؇ C
KMH
Summary of Specifications
Ⅲ PC board 2 or 4-pin snap-in; optional 4 or 5-pin straight terminals. Ⅲ Capacitance range: 47 to 220,000µF. Ⅲ Voltage range: 6.3 to 450VDC. Ⅲ Category temperature range: 40؇C to 105؇C for 6.3 to 100V; 25؇C to 105؇C
for 160 to 450V. Ⅲ Leakage current: 0.02CV(µA) or 3mA, whichever is smaller, after 5 minutes at 20؇C. Ⅲ Standard capacitance tolerance: ؓ20%
Ⅲ Nominal case size (DL): 2220mm to 4080mm. Ⅲ Rated lifetime: 2,000 hours at 105؇C with the rated ripple current applied.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
1/ 15
Free Datasheet http://www.datasheet4u.com/
KMH Series
KMH Specifications - Snap Mount
Item Category Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current Dissipation Factor ( Tan ␦) Characteristics
Engineering Bulletin Mar 07
40 to 105؇C for 6.3 to 100VDC; 25 to 105؇C for 160 to 450VDC 6.3 to 450VDC 47 to 220,000F ؓ20% ( M ) at 20؇C, 120Hz I 0.02CV ( A ) or 3mA, whichever is smaller, after 5 minutes at 20؇C. Where I = Max. leakage current ( A ), C = Nominal capacitance ( F ) and V = Rated voltage ( V ) At 20؇C, 120Hz
Rated Voltage ( V ) Tan ␦ ( DF ) Max.† 6.3 0.60 10 0.50 16 0.40 25 0.30 35 0.25 50 0.20 63 -100 0.15 160 - 250 315 - 450 0.15
* 0.10 *
* 0.15 maximum for 35mm and 40mm diameter or 20mm in length. † For rated voltages ≤ 63V, values are not valid for case sizes >35mm in diameter or >50mm in length. Low Temperature Characteristics At 120Hz, impedance ( Z ) ratio between the 25؇C or 40؇C value and 20؇C value shall not exceed the values given below.
Rated Voltage ( V ) Z (25؇C ) / Z (20؇C ) Z (40؇C ) / Z (20؇C ) 6.3 -16 4 15 25 3 10 35 3 8 50, 63 2 6 80, 100 2 5 160 - 400 4 — 450 8 —
Rated Ripple Current Multipliers
Ambient Temperature ( ؇C )
45؇C 60؇C 2.23 70؇C 2.12 85؇C 1.73 105؇C 1.00 2.64
SNAP MOUNT 105؇ C
Frequency (Hz )
DC Rated Voltage 6.3 -50V 63 -100V 160 - 250V 315 - 450V 50Hz 0.95 0.92 0.81 0.77 120Hz 1.00 1.00 1.00 1.00 300Hz 1.03 1.07 1.17 1.16 1kHz 1.05 1.13 1.32 1.30 10kHz 1.08 1.19 1.45 1.41 100kHz 1.08 1.20 1.50 1.43
KMH
Endurance (Load Life)
The following specifications shall be satisfied when the capacitors are restored to 20؇C after subjecting them to DC voltage for 2,000 hours at 105؇C with the rated ripple current applied. The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitors. Capacitance change: ≤ ؓ20% of initial measured value Tan ␦ ( DF ) : ≤ 200% of initial specified value Leakage current : ≤ initial specified value
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20؇C after exposing them for 1,000 hours at 105؇C without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements. Capacitance change: ≤ ؓ20% of initial measured value Tan ␦ ( DF ) : ≤ 150% of initial specified value Leakage current : ≤ initial specified value
2 / 15
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
Free Datasheet http://www.datasheet4u.com/
KMH Series
Diagram of Dimensions - Snap Mount
Snap Mount
Types VSN & VNN Ø 22~ Ø 35
See Pin Detail
Engineering Bulletin Mar 07
Unit: mm
Type VRD Ø 35
See Pin Detail A*
Pb-free PVC Sleeve
PC board pin-out
Pb-free PVC Sleeve
B C*
PC board pin-out
Dם1 2-2x
10
D35ם1
30°
22.5
** Vent
Lע2
** Vent
Lע2
2-4x
Type VND Ø 35 & Ø 40
See Pin Detail A* D35ם1
Type VQD Ø 35
See Pin Detail A* 22.5 D35ם1
Pb-free PVC Sleeve
B C*
PC board pin-out
Pb-free PVC Sleeve
B C*
PC board pin-out
30°
30°
22.5
** Vent
Lע2
2-4x
** Vent
Lע2
2-4x
SNAP MOUNT 105؇ C
KMH
VS & VN Pin Dimensions
Type VQT Ø 40
See Pin Detail B* D40ם1 A* PC board pin-out C D* 360° 6 25
W2
W1 Edge of can
Pb-free PVC Sleeve
P
W
** Vent
Type VSN Ø 22 - Ø 30.