Document
www.DataSheet4U.com
Engineering Bulletin
No.646G / Oct.2004
Aluminum Electrolytic Capacitors
@Slender case sizes are lined up for laying down small places on PC board @For electronic ballast circuits and other long life required applications @Endurance with ripple current : 105C 8000 to 10000 hours @Non solvent-proof type @Pb-free design
?SPECIFICATIONS
Items
Category Temperature Range -40 to +105C (160 to 400Vdc) -25 to+105C (450Vdc)
Characteristics
Rated Voltage Range 160 to 450Vdc Capacitance Tolerance P20% (M) (at 20C, 120Hz) time After 1 minute After 5 minutes Leakage Current CV CV[1000 I=0.1CV+40 I=0.03CV+15 CV>1000 I=0.04CV+100 I=0.02CV+25 Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) (at 20C) Rated voltage (Vdc) Dissipation Factor 160 to 250V 350 & 400V 450V (tanE) tanE (Max.) 0.20 0.24 0.24 (at 20C, 120Hz) Rated voltage (Vdc) Low Temperature 160 to 250V 350 & 400V 450V Characteristics Z(-25C)/Z(+20C) 6 5 3 (Max. Impedance Ratio) Z(-40C)/Z(+20C) (at 120Hz) 6 6 The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated Endurance ripple current is applied for 10000 hours (8000 hours for F10) at 105C. Capacitance change [P20% of the initial value D.F. (tanE) [200% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 105C Shelf Life without voltage applied. Capacitance change [P20% of the initial value D.F. (tanE) [200% of the initial specified value Leakage current [500% of the initial specified value
?DIMENSIONS [mm]
@Terminal Code : E
FP0.5 FP0.5 Fd Sleeve (PET) fD fd F fD' L' 10 0.6 5.0 18 12.5 16 0.6 0.8 0.8 5.0 7.5 7.5 FD+0.5max. L+1.5max.
FD'
Vent
L'
15min.
4min.
(F10)
(F12.5 to F18)
Gas escaped end seal
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E KMX A A A E A A A A A M A A A S
Supplement code Size code Capacitance tolerance code Capacitance code (ex. 3.3MF:3R3,10MF:100,100MF:101) Lead formingĀ·taping code Terminal code Voltage code (ex. 160V:161,250V:251,450V:451) Series code Category
Speciļ¬cations in this bulletin are subject to change without notice.
NIPPON CHEMI-CON CORPORATION
1219
1
www.DataSheet4U.com
Engineering Bulletin
No.646G / Oct.2004
Aluminum Electrolytic Capacitors
?STANDARD RATINGS
WV (Vdc) Cap (mF) Rated ripple Impedance current Case size (omax/ (mArms/105c) 20c, fDbL(mm) 100kHz) 120Hz 100kHz 10B 12.5B 12.5B 16B 16B 18B 10B 16B 12.5B 16B 18B 16B 18B 16B 16B 18B 10B 12.5B 12.5B 12.5B 16B 10B 16B 18B 12.5B 16B 12.5B 18B 16B 18B 18B 10B 12.5B 12.5B 12.5B 16B 10B 16B 18B 12.5B 16B 18B 12.5B 18B 20 20 25 20 25 20 50 25 45 31.5 25 40 31.5 55 60 55 20 20 20 25 20 50 25 20 40 25 55 31.5 50 50 60 20 20 25 25 20 50 25 20 40 31.5 25 55 31.5 1.3 0.91 0.63 0.47 0.27 0.31 0.77 0.27 0.52 0.22 0.23 0.35 0.22 0.25 0.23 0..