Nonvolatile Digital Potentiometer
Data Sheet
Quad Channel, 128-/256-Position, I2C, Nonvolatile Digital Potentiometer
AD5123/AD5143
FEATURES
10 kΩ and 10...
Description
Data Sheet
Quad Channel, 128-/256-Position, I2C, Nonvolatile Digital Potentiometer
AD5123/AD5143
FEATURES
10 kΩ and 100 kΩ resistance options Resistor tolerance: 8% maximum Wiper current: ±6 mA Low temperature coefficient: 35 ppm/°C Wide bandwidth: 3 MHz Fast start-up time < 75 μs Linear gain setting mode Single- and dual-supply operation Wide operating temperature: −40°C to +125°C 3 mm × 3 mm package
APPLICATIONS
Portable electronics level adjustment LCD panel brightness and contrast controls Programmable filters, delays, and time constants Programmable power supplies
GENERAL DESCRIPTION
The AD5123/AD5143 potentiometers provide a nonvolatile solution for 128-/256-position adjustment applications, offering guaranteed low resistor tolerance errors of ±8% and up to ±6 mA current density in the Ax, Bx, and Wx pins.
The low resistor tolerance and low nominal temperature coefficient simplify open-loop applications as well as applications requiring tolerance matching.
The linear gain setting mode allows independent programming of the resistance between the digital potentiometer terminals, through the RAW and RWB string resistors, allowing very accurate resistor matching.
The high bandwidth and low total harmonic distortion (THD) ensure optimal performance for ac signals, making the devices suitable for filter design.
The low wiper resistance of only 40 Ω at the ends of the resistor array allows for pin to pin connection.
The wiper values can be set through an I2C-compatible digit...
Similar Datasheet