Li+ Battery Charger
APL3202
Li+ Battery Charger with Thermal Regulation
Features
General Description
• Programmable Charge Current Up to...
Description
APL3202
Li+ Battery Charger with Thermal Regulation
Features
General Description
Programmable Charge Current Up to 500mA Charge Status Output Pin Soft-Start Limits Inrush Current 4.2V Charge Termination Voltage with ±1%
Accuracy
45mA Pre-charge Current (R =2K) SET
Thermal Regulation Simplifies Board Design
Enable/Disable Control
Available in a SOT-23-5 Package
Lead Free and Green Devices Available
(RoHS Compliant)
Applications
Bluetooth Applications MP3 Players Cell Phones Wireless Appliances
The APL3202 is a constant-current/constant-voltage linear charger for single cell Li+ batteries. The APL3202 needs no external MOSFETs or diodes, and accepts input voltages up to 6.5V. The small package and low external component counts make the APL3202 an idea part for portable applications. On-chip thermal regulation protects the APL3202 from excessive temperature and optimizes the board design for compact size and typical thermal conditions. When the junction temperature reaches the thermal regulation threshold, the charger does not shut down but simply reduces the charge current. Charge current can be programmed by connecting an external resistor from ISET pin to GND. Using an external MOSFET to disconnect the resistor from ground shuts down the charger, and reduces the input supply current down to 25µA. The APL3202 also has the STAT pin to indicate charge status. The APL3202 is available in a SOT-23-5 package, and operates over the -40°C to +...
Similar Datasheet