DatasheetsPDF.com

MB1F Dataheets PDF



Part Number MB1F
Manufacturers Luguang Electronic
Logo Luguang Electronic
Description (MB05F - MB10F) Silicon Bridge Rectifiers
Datasheet MB1F DatasheetMB1F Datasheet (PDF)

MB05F-MB10F Silicon Bridge Rectifiers VOLTAGE RANGE: 50 --- 1000 V CURRENT: 0.5 A Features — — — — — — — This series is UL recognized under Component Index, file number E239431 Glass passivated chip junctions Plastic materrial has U/L flammability classification 94V-O High surge overload rating: 25A peak Saves space on printed circuit boards High temperature soldering guaranteed: 260°C/10 seconds at 5 lbs. (2.0kg) tension 1. 4¡À0.2 4.8¡À0.2 MBF 3.8¡0 À .2 Mechanical Data — — — — — Case: Mold.

  MB1F   MB1F



Document
MB05F-MB10F Silicon Bridge Rectifiers VOLTAGE RANGE: 50 --- 1000 V CURRENT: 0.5 A Features — — — — — — — This series is UL recognized under Component Index, file number E239431 Glass passivated chip junctions Plastic materrial has U/L flammability classification 94V-O High surge overload rating: 25A peak Saves space on printed circuit boards High temperature soldering guaranteed: 260°C/10 seconds at 5 lbs. (2.0kg) tension 1. 4¡À0.2 4.8¡À0.2 MBF 3.8¡0 À .2 Mechanical Data — — — — — Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Polarity: Polarity symbols marked on body Dimensions in inches and (millimeters) Mounting Position: Any Weight: 0.0078 ounce, 0.22 gram 0.6¡0 À .1 2.5¡À 0.25 1.0¡À 6.8¡À 0.15 0.2 0.3¡À 0.1 Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. MB05F MB1F Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forw ard output current @TA=25 MB2F MB4F MB6F MB8F MB10F UNITS 200 140 200 400 280 400 0.5 600 420 600 800 560 800 1000 700 1000 V V V A V RRM V RMS V DC IF(AV) 50 35 50 100 70 100 Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load Maximum instantaneous forw ard voltage @ 0.4 A Maximum reverse current at rated DC blocking voltage @TA=25 @TA=100 IFSM 25 1.2¡À 0.2 A VF IR CJ 1.0 5.0 0.5 13 V μA mA pF /W Typical junction capacitance per leg (NOTE 3) Typical thermal resistance per leg (NOTE 1) (NOTE 2) Operating junction temperature range Storage temperature range R ¦ÈJA R¦ÈJL TJ TSTG 85 20 - 55 ---- + 150 - 55 ---- + 150 NOTES: (1) On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.3 x 1.3mm) pads (2) On aluminum substrate P.C.B. with an area of 0.8" x 0.8" (20 x 20mm) mounted on 0.05 x 0.05" (1.3 x 1.3mm) solder pad (3) Measured at 1.0 MHz and applied rev erse v oltage of 4.0 Volts Free Datasheet http://www.datasheet4u.com/ MB05F-MB10F Silicon Bridge Rectifiers Ratings AND Charactieristic Curves FIG.2 -- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG AVERAGE FORWARD CURRENT, AMPERES FIG.1 -- DERATING CURVE FOR OUTPUT RRECTIFIED CURRENT 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 GLASS EPOXY P.C.B. PEAK FORWARD SURGE CURRENT, AMPERES 35 30 25 f=60Hz TA=40 SINGLE HALF SINE-WAVE (JEDEC Method) Aluminum Substrate 20 15 f=50Hz 10 5.0 0 1.0 CYCLE 1 10 100 RESISTIVE OR INDUCTIVE LOAD 0 30 60 90 120 150 NUMBER OF CYCLES AT 50/60Hz AMBIENT TEMPERATURE, INSTANTANEOUS REVERSE CURRENT, MICRO AMPERES FIG.4 -- TYPICAL REVERSE CHARACTERISTIC 100 10 TJ=125 INSTANTANEOUS FORWARD CURRENT, FIG.3 -- TYPICAL FORWARD VOLTAGE KKKKCHARACTERISTICS PER LEG 1.0 0.1 TJ=25 .01 10 0 20 40 60 80 100 1 AMPERES TJ=25 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 -- TYPICAL JUNCTION CAPACITANCE PER BBBBBBB ELEMENT CAPACITANCE, pF 100 60 40 20 10 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 f=1MHz TJ=25 0.1 PULSE WIDTH=300µS 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS REVERSE VOLTAGE, VOLTS Free Datasheet http://www.datasheet4u.com/ .


MB05F MB1F MB2F


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)