Document
MB05F-MB10F
Silicon Bridge Rectifiers
VOLTAGE RANGE: 50 --- 1000 V CURRENT: 0.5 A
Features
This series is UL recognized under Component Index, file number E239431 Glass passivated chip junctions Plastic materrial has U/L flammability classification 94V-O High surge overload rating: 25A peak Saves space on printed circuit boards High temperature soldering guaranteed: 260°C/10 seconds at 5 lbs. (2.0kg) tension
1. 4¡À0.2
4.8¡À0.2
MBF
3.8¡0 À .2
Mechanical Data
Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Polarity: Polarity symbols marked on body Dimensions in inches and (millimeters) Mounting Position: Any Weight: 0.0078 ounce, 0.22 gram
0.6¡0 À .1 2.5¡À 0.25 1.0¡À 6.8¡À 0.15 0.2 0.3¡À 0.1
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%.
MB05F MB1F
Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forw ard output current @TA=25
MB2F MB4F MB6F MB8F MB10F UNITS
200 140 200 400 280 400 0.5 600 420 600 800 560 800 1000 700 1000 V V V A
V RRM V RMS V DC IF(AV)
50 35 50
100 70 100
Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load Maximum instantaneous forw ard voltage @ 0.4 A Maximum reverse current at rated DC blocking voltage @TA=25 @TA=100
IFSM
25
1.2¡À
0.2
A
VF IR CJ
1.0 5.0 0.5 13
V μA mA pF /W
Typical junction capacitance per leg (NOTE 3) Typical thermal resistance per leg (NOTE 1) (NOTE 2) Operating junction temperature range Storage temperature range
R ¦ÈJA R¦ÈJL
TJ TSTG
85 20
- 55 ---- + 150 - 55 ---- + 150
NOTES: (1) On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.3 x 1.3mm) pads (2) On aluminum substrate P.C.B. with an area of 0.8" x 0.8" (20 x 20mm) mounted on 0.05 x 0.05" (1.3 x 1.3mm) solder pad (3) Measured at 1.0 MHz and applied rev erse v oltage of 4.0 Volts
Free Datasheet http://www.datasheet4u.com/
MB05F-MB10F
Silicon Bridge Rectifiers
Ratings AND Charactieristic Curves
FIG.2 -- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG AVERAGE FORWARD CURRENT, AMPERES FIG.1 -- DERATING CURVE FOR OUTPUT RRECTIFIED CURRENT
0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0
GLASS EPOXY P.C.B.
PEAK FORWARD SURGE CURRENT, AMPERES
35 30 25
f=60Hz TA=40 SINGLE HALF SINE-WAVE (JEDEC Method)
Aluminum Substrate
20 15
f=50Hz
10 5.0 0
1.0 CYCLE
1
10
100
RESISTIVE OR INDUCTIVE LOAD
0
30
60
90
120
150
NUMBER OF CYCLES AT 50/60Hz AMBIENT TEMPERATURE, INSTANTANEOUS REVERSE CURRENT, MICRO AMPERES FIG.4 -- TYPICAL REVERSE CHARACTERISTIC
100
10
TJ=125
INSTANTANEOUS FORWARD CURRENT,
FIG.3 -- TYPICAL FORWARD VOLTAGE KKKKCHARACTERISTICS PER LEG
1.0
0.1 TJ=25 .01
10
0
20
40
60
80
100
1
AMPERES
TJ=25
PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 -- TYPICAL JUNCTION CAPACITANCE PER BBBBBBB ELEMENT CAPACITANCE, pF
100 60 40 20 10 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 f=1MHz TJ=25
0.1
PULSE WIDTH=300µS
0.01 0.2
0.4
0.6
0.8
1.0
1.2
1.4
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
REVERSE VOLTAGE, VOLTS
Free Datasheet http://www.datasheet4u.com/
.