Document
1500W Surface Mount Transient Voltage Suppressor SMCJ 5.0A - 170CA
1500W Surface Mount Transient Voltage Suppressor
Features
• Stand-off voltage from 5.0 to 170 volts • Glass passivated junction • 1500W peak pulse power capability with a 10/1000μs waveform, repetition rate(duty cycle): 0.01% • Fast response time: typically less than 1.0ps from 0v to VBR • Low incremental surge resistance, excellent clamping capability SMC • High temperature soldering guaranteed: 250°C/10 seconds at terminals • This series is UL recognized under component index. File number E315008 • RoHS Compliant
Maximum Ratings (T Ambient=25ºC unless noted otherwise)
Symbol VWM PPPM IPPM IFSM VF Description
Stand-Off Voltage Peak Pulse Power Dissipation on 10/1000μs Waveform(1) (2) Peak Pulse Current on 10/1000μs Waveform(1) Peak Forward Surge Current 8.3ms Single Half Sine-wave, Uni-directional only (2) Maximum Instantaneous Forward Voltage for Unidirectional only Operating Junction and Storage
Value
5.0 to 170 Minimum 1500 See Table 200 3.5 5.0 -55 to 150
Unit
V W A A V °C
Conditions
SMCJ5.0~SMCJ90 SMCJ100~SMCJ170
TJ,TSTG Temperature Range
Notes: (1) Non-repetitive current pulse, per Fig.3 and derated above TA = 25°C per Fig. 2 (2) Mounted on 0.31 x 0.31” (8.0 x 8.0mm) copper pads to each terminal (3) Mounted on minimum recommended pad layout
TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com
Tel: (800)-TAITRON Fax: (800)-TAITFAX (800)-824-8766 (800)-824-8329 (661)-257-6060 (661)-257-6415
Rev. D/AH 2008-02-25 Page 1 of 6
Free Datasheet http://www.datasheet4u.com/
1500W Surface Mount Transient Voltage Suppressor SMCJ 5.0A - 170CA
Mechanical Data
Case: Epoxy: Terminals: Polarity: Mounting Position: Weight: JEDEC DO-214AB(SMC) molded plastic Meets UL 94V-0 flammability rating Solder plated, solderable per MIL-STD-750, Method 2026 Cathode indicated by color band except Bi-directional Any 0.007 ounce, 0. 21 gram
Electrical Characteristics (T Ambient=25ºC unless noted otherwise)
Device Marking Code StandOff Voltage Breakdown Voltage Test Current @ Max. Clampi ng Vltg. @ Max. Peak Pulse Current Max. Reverse Leakage Current @ V WM
P/N (note3)
V BR IT(mA)
Min. 6.4 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 Max. 7.07 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 1.0 10
IPPM VC (V)
9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6
Uni-Polar SMCJ5.0A SMCJ6.0A SMCJ6.5A SMCJ7.0A SMCJ7.5A SMCJ8.0A SMCJ8.5A SMCJ9.0A SMCJ10A SMCJ11A SMCJ12A SMCJ13A SMCJ14A SMCJ15A SMCJ16A SMCJ17A
Bi-Polar SMCJ5.0CA SMCJ6.0CA SMCJ6.5CA SMCJ7.0CA SMCJ7.5CA SMCJ8.0CA SMCJ8.5CA SMCJ9.0CA SMCJ10CA SMCJ11CA SMCJ12CA SMCJ13CA SMCJ14CA SMCJ15CA SMCJ16CA SMCJ17CA
Uni GDE GDG GDK GDM GDP GDR GDT GDV GDX GDZ GEE GEG GEK GEM GEP GER
Bi GDE GDG BDK GDM BDP BDR BDT BDV BDX GDZ BEE GEG BEK BEM GEP GER
V WM
(V) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0
IPPM (A)
(note1)
ID (μA)
(.