Transient Voltage Suppressor
SMCJ Series
1500W Surface Mount Transient Voltage Suppressor
P b Lead(Pb)-Free
Features:
* For surface mounted applicat...
Description
SMCJ Series
1500W Surface Mount Transient Voltage Suppressor
P b Lead(Pb)-Free
Features:
* For surface mounted applications in order to optimize board space * Low profile package * Built-in strain relief * Glass passivated junction * Low inductance * Excellent clamping capability * Repetition Rate(duty cycle):0.05% * Fast response time: typically less than 1.0ps from 0 Volts to BV min * Typical IR less than 1μA above 10V * High temperature soldering: 250°C/10 seconds at terminals * Plastic package has Underwriters Laboratory Flammability 94V-O
VOLTAGE 5.0 to 440 Volts Peak Pulse Power 1500 Watt
SMC(DO-214AB)
Mechanical Data:
* MECHANICAL DATA * Case: JEDEC DO214AB. Molded plastic over glass passivated junction * Terminal: Solder plated, solderable per MIL-STD-750, Method 2026 * Polarity: Color band denotes positive end (cathode) except Bidirectional * Standard Packaging: 16mm tape(EIA STD RS-481) * Weight: 0.007ounce, 0.21gram
DEVICES FOR BIPOLAR APPLICATION: For Bidirectional use C or CA Suffix for types SMCJ5.0 thru types SMCJ170(e.g. SMCJ5.0 , SMCJ170CA) Electrical characteristics apply in both directions MAXIMUM RATINGS AND CHARACTERISTICS(TA=25°C Unless otherwise specified) Rating
Peak Pulse Power Dissipation on 10/1000µs waveform (Note 1,FIG.1) Peak Pulse Current of on 10/1000µs waveform (Note 1,FIG.3) Peak Forward Surge Current,8.3ms Single Half Sine-Wave Superimposed on Rated Load,(JEDEC Method) (Note 3) Operating junction Temperature Range Storage Temperature Range...
Similar Datasheet