MBR1035CT-MBR10200CT
10.0AMP. Schottky Barrier Rectifiers
TO-220AB
Features
Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection High temperature soldering guaranteed: 260oC/10 seconds,0.25”(6.35mm)from case
Mechanical Data
Cases: JEDEC TO-220AB molded plastic body Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max Weight: 0.08 ounce, 2.24 grams
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
Type Number
Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Tc=125OC Peak Repetitive Forward Current (Rated VR, Square Wave, 20KHz) at Tc=125oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) Maximum Instantaneous Forward Voltage at: (Note 2) IF=5A, TC=25oC IF=5A, TC=125oC o IF=10A, TC=25 C IF=10A, TC=125oC Maximum Instantaneous Reverse Current @ Tc =25 oC at Rated DC Blocking Voltage (Note 2) @ Tc=125 oC Voltage Rate of Change (Rated VR) Maximum Typical Thermal Resistance (Note 3) Operating Junction Temperature Range Storage Temperature Range
Symbol
VRRM VRMS VDC I(AV) IFRM IFSM IRRM VF
MBR MBR MBR MBR MBR MBR MBR MBR 1035 1045 1050 1060 1090 10100 10150 10200 CT CT CT CT CT CT CT CT
Units
V V V A A A
35 24 35
45 31 45
50 35 50
60 42 60
90 63 90 10 32 120
100 70 100
150 105 150
200 140 200
1.0 0.70 0.57 0.80 0.67 0.80 0.65 0.90 0.75 0.1 15 10 10,000 1.5 -65 to +150 -65 to +175 2.0 0.85 0.75 0.95 0.85
0.5 0.88 0.78 0.98 0.88
A V
IR dV/dt RθJC TJ TSTG
mA mA V/uS o C/W o C o C
Notes:
1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Thermal Resistance from Junction to Case Per Leg, Mount on Heatsink Size of 2 in x 3 in x 0.25in Al-Plate.
- 108 -
http://www.luguang.cn
mail:
[email protected]
Free Datasheet http://www.datasheet4u.com/
MBR1035CT-MBR10200CT
10.0AMP. Schottky Barrier Rectifiers
RATINGS AND CHARACTERISTIC CURVES (MBR1035CT THRU MBR10200CT)
FIG.1- FORWARD CURRENT DERATING CURVE
6
FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
180
PEAK FORWARD SURGE CURRENT. (A)
AVERAGE FORWARD CURRENT. (A)
RESISTIVE OR INDUCTIVE LOAD 5
150
Tj=Tj max. 8.3ms Single Half Sine-Wave JEDEC Method
4
120
3
90
2 1 0 0 50 100 o CASE TEMPERATURE. ( C) 150
60
30
0 1 10 NUMBER OF CYCLES AT 60Hz 100
FIG.3- TYPICAL FORWARD CHARACTERISTICS
200 100 50
FIG.4- TYPICAL REVERSE CHARACTERISTICS
MBR1035CT-1045CT 10
Tj=25oC Pulse Width=300 s 1% Duty Cycle
INSTANTANEOUS REVERSE CURRENT. (mA)
INSTANTANEOUS FORWARD CURRENT. (A)
50
Tj=125 0C MBR1050CT-1060CT 1
10
MBR1050CT-1060CT MBR1090CT-10100CT
5
Tj=75 0C 0.1
1
MBR1035CT-1045CT MBR10150CT-10200CT
0.01
MBR1090CT-10200CT Tj=25 0C
0.1
0.001 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 FORWARD VOLTAGE. (V)
20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
FIG.5- TYPICAL JUNCTION CAPACITANCE
TRANSIENT THERMAL IMPEDANCE. ( OC/W)
5,000 100
FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS PER LEG
JUNCTION CAPACITANCE.(pF)
1,000
Tj=25 0C f=1.0MHz Vsig=50mVp-p
10.0
500
1
100 0.1
1.0
10 REVERSE VOLTAGE. (V)
100
0.1 0.01
0.1
1 T, PULSE DURATION. (sec)
10
100
http://www.luguang.cn
mail:
[email protected]
Free Datasheet http://www.datasheet4u.com/
.