BD6376GUL

Datasheet H-Bridge Drivers for DC Brush Motors Single H-Bridge Driver High-Speed Switching Type BD6376GUL General Description The BD6376GUL provides a single H-bridge motor driver which features wide range of motor power supply voltage from 2.0V to 9.0V and low power consumption to switch low ON-Resistance DMOS transistors at high speed. This small surface mounting package is most suitable for mobile system, home appliance and various applications. Features  Low ON-Resistance Power DMOS Output  Charge Pump-Less with PDMOS High-Side Driver  Under Voltage Locked Out protection & Thermal Shut Down Function Applications  Mobile System  Home Appliance  Amusement System, etc Key Specifications  Power Supply Voltage Range: 2.5V to 3.6V  Motor Power Supply Voltage Range: 2.0V to 9.0V  Circuit Current (Open Mode): 360μA(Typ)  Stand-By Current: 1μA(Max)  Control Input Voltage Range: 0V to VCCV  Logic Input Frequency: 200kHz(Max)  Minimum Logic Input Pulse Width: 0.5μs(Min)  Turn On Time: 200ns(Typ)  Turn Off Time: 60ns(Typ)  H-Bridge Output Current (DC): -1.0A to +1.0A  Output ON-Resistance (Total): 0.45Ω(Typ)  Operating Temperature Range: -30°C to +85°C Package VCSP50L1 W(Typ) x D(Typ) x H(Max) 1.60mm x 1.60mm x 0.55mm Typical Application Circuit Bypass Filter Capacitor for Power Supply Power-Saving H: Active L: Stand-by PS A3 1µF to 100µF VCC A1 Power Save TSD & UVLO BandGap Motor Control Input INA B3 INB B2 Logic Level Shift &...