DatasheetsPDF.com

pressure filters. HF735 Datasheet

DatasheetsPDF.com

pressure filters. HF735 Datasheet






HF735 filters. Datasheet pdf. Equivalent




HF735 filters. Datasheet pdf. Equivalent





Part

HF735

Description

In line high pressure filters



Feature


In line high pressure filters HF 735 se ries Free Datasheet http://www.datashe et4u.com/ THE IMPORTANCE OF AN EFFICIE NT FILTRATION The main cause of anomal ies in hydraulic systems has to be attr ibuted to the presence of contaminants in the fluid. The nature of the contami nant may be: gaseous, namely air mixed with the fluid; fluid, it depends on wa ter penetrating th.
Manufacture

IKRON

Datasheet
Download HF735 Datasheet


IKRON HF735

HF735; e fluid; solid, therefore particles of v arious origins and dimensions. Customer s who operate equipments are always foc used on obtaining the best possible per formance, lower energy consumptions and greater respect for the environment. T hese characteristics can be attained by using top quality components in the hy draulic system for generating and regul ating the fluid po.


IKRON HF735

wer, which are also more sensitive to th e presence of contaminants in the fluid . Starting from these requirements, we understand how important and fundamenta l it is to prevent the presence of air and water from mixing in the fluid tank by using dedicated solutions. It is a lso crucial to limit the presence of so lid particles in the hydraulic circuit through a suitable.


IKRON HF735

filtering system, which is indispensabl e to maintain the project requirements of the system over time and to keep run ning costs low. The correct choice of a filter and its optimum position in the hydraulic system requires the same car e and experience needed to choose all t he other components. The use of filters with larger filtering surfaces reduces , at equal flow ra.

Part

HF735

Description

In line high pressure filters



Feature


In line high pressure filters HF 735 se ries Free Datasheet http://www.datashe et4u.com/ THE IMPORTANCE OF AN EFFICIE NT FILTRATION The main cause of anomal ies in hydraulic systems has to be attr ibuted to the presence of contaminants in the fluid. The nature of the contami nant may be: gaseous, namely air mixed with the fluid; fluid, it depends on wa ter penetrating th.
Manufacture

IKRON

Datasheet
Download HF735 Datasheet




 HF735
In line high pressure filters
HF 735 series
Free Datasheet http://www.datasheet4u.com/




 HF735
THE IMPORTANCE OF AN EFFICIENT FILTRATION
The main cause of anomalies in hydraulic systems has to
be attributed to the presence of contaminants in the fluid.
The nature of the contaminant may be: gaseous, namely
air mixed with the fluid; fluid, it depends on water
penetrating the fluid; solid, therefore particles of various
origins and dimensions.
Customers who operate equipments are always focused
on obtaining the best possible performance, lower
energy consumptions and greater respect for the
environment.
These characteristics can be attained by using top
quality components in the hydraulic system for
generating and regulating the fluid power, which are also
more sensitive to the presence of contaminants in the
fluid.
Starting from these requirements, we understand how
important and fundamental it is to prevent the presence
of air and water from mixing in the fluid tank by using
dedicated solutions.
It is also crucial to limit the presence of solid particles in
the hydraulic circuit through a suitable filtering system,
which is indispensable to maintain the project
requirements of the system over time and to keep
running costs low.
The correct choice of a filter and its optimum position in
the hydraulic system requires the same care and
experience needed to choose all the other components.
The use of filters with larger filtering surfaces reduces, at
equal flow rates, the superficial contaminant load and
therefore the filter's life is extended proportionally.
To maintain the maximum efficiency of the system, the
filters must have a clogging indicator showing the
differential pressure on the filtering cartridge and to
immediately point out when the cartridge needs
replacing in order to prevent the by-pass valve from
opening.
The following factors should be analysed when choosing the ideal filter:
Ø The filtration degree required to protect the most sensitive component from contamination
Ø The points of the circuit in which the filters have to be installed
Ø The working pressure of the system
Ø The maximum flow rate and the type of fluid to be filtered
Ø The duty cycle
Ø The retention efficiency of the filtering cartridge
Ø The contaminant accumulation capacity of the filtering cartridge
Ø The working ambient temperature
Each filter used generates a pressure drop that increases continuously as time goes by. This pressure drop represents
an efficiency index of the filter itself.
When the hydraulic system is about to be assembled, all the components must be perfectly clean and the fluid has to be
added through a device complete with a filter.
During the test phase, it is advisable to run some work cycles at low pressure in order to create the best possible
conditions for all the components.
Free Datasheet http://www.datasheet4u.com/




 HF735
TECHNICAL CHARACTERISTICS
HF 735
The filters of the HF 735 series are connected to the
pressure line of the circuit and they protect the system’s
components against contaminant particles.
The standard filters are supplied with by-pass valve
calibrated at 87 psi (6 bar).
For applications where the maximum protection of the
system is requested, such as servo drives or proportional
controls, the filters are equipped with highly resistant
filtering elements (versions “HC”) and do not have a
by-pass valve.
l Flow up to 40 US gpm (150 l/min)
l Maximum working pressure 4640 psi (320 bar)
l High efficiency multilayer system
l Direct mounting on manifold
MATERIALS
Head
Bowl
Seals
End cap
Inner tube
Filter media
Spheroidal cast iron
GS 450-10 UNI ISO 1083
Extruded steel
Buna - Viton
Zinc plated steel
Zinc plated steel
Inorganic micro-fibre glass
FLUID COMPATIBILITY
Conforming to ISO 2943 (Norm ISO 6743/4)
Oil mineral (1)
HH - HL - HM - HR - HV - HG
Water emulsion (1)
HFAE - HFAS
Water glycol (1)
HFC
Syntetic fluid (2)
HS - HFDR - HFDU - HFDS
(1) With Buna seals
(2) With Viton seals
FLOW
Flow max.
40 US gpm (150 l/min)
PRESSURE
Working pressure
4640 psi (320 bar)
Testing pressure
6960 psi (480 bar)
Burst pressure
9280 psi (640 bar)
Element collapse pressure
290 psi (20 bar) (version LC)
rating (conforming to ISO 2941) 3045 psi (210 bar) (version HC)
BY-PASS VALVE
By-pass setting
87 psi (6 bar)
OPERATING TEMPERATURE
With Buna seals
-22 ¸ 195 °F (-30 ¸ 90 °C)
With Viton seals
-4 ¸ 230 °F (-20 ¸ 110 °C)
ENDURANCE STRENGTH
1.000.000 cycle
0 ¸ 4640 psi (0 ¸ 320 bar)
DEGREE OF FILTRATION
Multi-pass test conforming to ISO 16889 (regulation in force)
Contaminant ISO MTD - final Dp 87 psi (6 bar)
Code
Degree of
filtration
Ratio
ß x(c)
Percentage of
efficiency
FG003
5 mm
ß 5(c) ³ 200
99,5 %
FG006
7 mm
ß 7(c) ³ 200
99,5 %
FG010
10 mm
ß 10(c) ³ 200
99,5 %
FG025
21 mm
ß 21(c) ³ 200
99,5 %
Multi-pass test conforming to ISO 4572. (previous regulation)
Contaminant ACFTD - final Dp 87 psi (6 bar)
Code
Degree of
filtration
Ratio
ßx
Percentage of
efficiency
FG003
FG006
FG010
FG025
3 mm
6 mm
10 mm
25 mm
ß 3 ³ 200
ß 6 ³ 200
ß 10 ³ 200
ß 25 ³ 200
99,5 %
99,5 %
99,5 %
99,5 %
INDICATORS (3)
Visual differential indicator
Visual electrical differential indicator
Visual electrical differential indicator with thermostat
(3) Characteristics and dimensions pag. 11
ICAT022-002
002
1
Free Datasheet http://www.datasheet4u.com/






Recommended third-party HF735 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)