DatasheetsPDF.com

Receiver Manual. BT1611I Datasheet

DatasheetsPDF.com

Receiver Manual. BT1611I Datasheet






BT1611I Manual. Datasheet pdf. Equivalent




BT1611I Manual. Datasheet pdf. Equivalent





Part

BT1611I

Description

AM/FM/CD/MP3/WMA Receiver Manual



Feature


BT1611i Owner's Manual AM/FM/CD/MP3/WMA Receiver with Bluetooth Technology BT16 11I MP3/WMA RECEIVER TUNE / SUB RECORD BASS AUX IN MENU INT Free Datasheet http://www.datasheet4u.com/ BT1611i P REPARATION Getting Started Congratulati ons on your purchase of the Phase Linea r BT1611i Mobile AM/FM/CD/MP3/WMA Recei ver. It’s a good idea to read all of the instructions bef.
Manufacture

Audiovox

Datasheet
Download BT1611I Datasheet


Audiovox BT1611I

BT1611I; ore beginning the installation. We recom mend having your Phase Linear BT1611i i nstalled by a reputable installation sh op. Contents Installation Instructions. ............................. 3 Wiring ....................................... ................. 6 Operating Instructi ons ............................... 7 T uner Operation ........................ ...............11 .


Audiovox BT1611I

CD Player Operation .................... ........... 13 MP3/WMA Operation ...... ........................ 15 Using a USB Device or SD Card............. 19 iPod Operation ............................ ............ 21 Bluetooth Operation ... ............................. 23 Remote Control .............................. ......... 27 Care and Maintenance ..... ...................


Audiovox BT1611I

..... 28 Troubleshooting................ ....................... 29 Specificatio ns .................................... ...... 30 stores and car stereo special ty shops. Always check the kit applicat ion before purchasing to make sure the kit works with your vehicle. If you nee d a kit but cannot locate one, call our customer support line at 1-800-323-481 5. (U.S.A. and Can.

Part

BT1611I

Description

AM/FM/CD/MP3/WMA Receiver Manual



Feature


BT1611i Owner's Manual AM/FM/CD/MP3/WMA Receiver with Bluetooth Technology BT16 11I MP3/WMA RECEIVER TUNE / SUB RECORD BASS AUX IN MENU INT Free Datasheet http://www.datasheet4u.com/ BT1611i P REPARATION Getting Started Congratulati ons on your purchase of the Phase Linea r BT1611i Mobile AM/FM/CD/MP3/WMA Recei ver. It’s a good idea to read all of the instructions bef.
Manufacture

Audiovox

Datasheet
Download BT1611I Datasheet




 BT1611I
BT1611i
Owner's Manual
BT1611I MP3/WMA RECEIVER
SUB
RECORD
BASS
INT
AM/FM/CD/MP3/WMA Receiver
with Bluetooth Technology
MENU
/
AUX IN
TUNE




 BT1611I
PREPARATION
Getting Started
Congratulations on your purchase of the Phase
Linear BT1611i Mobile AM/FM/CD/MP3/WMA
Receiver. It’s a good idea to read all of the
instructions before beginning the installation.
We recommend having your Phase Linear
BT1611i installed by a reputable installation
shop.
Contents
Installation Instructions.............................. 3
Wiring ........................................................ 6
Operating Instructions ............................... 7
Tuner Operation .......................................11
CD Player Operation ............................... 13
MP3/WMA Operation .............................. 15
Using a USB Device or SD Card............. 19
iPod Operation ........................................ 21
Bluetooth Operation ................................ 23
Remote Control ....................................... 27
Care and Maintenance ............................ 28
Troubleshooting....................................... 29
Specifications .......................................... 30
Installation Requirements
This unit is designed for installation in cars,
trucks and vans with an existing radio opening.
In many cases, a special installation kit will be
required to mount the radio to the dashboard.
These kits are available at electronics supply
stores and car stereo specialty shops. Always
check the kit application before purchasing to
make sure the kit works with your vehicle. If you
need a kit but cannot locate one, call our
customer support line at 1-800-323-4815.
(U.S.A. and Canada only.)
Tools and Supplies
The following tools and supplies are needed to
install the radio.
• Torx type, flathead and Philips screwdrivers
• Wire cutters and strippers
• Tools to remove existing radio (screwdriver,
socket wrench set or other tools)
• Electrical tape
• Crimping tool
• Volt meter/test light
• Crimp connections
• 18 gauge wire for power connections
• 16-18 gauge speaker wire
Speaker Requirements
Only connect speakers rated with a load
impedance of 4 ohms. Speakers with a load
impedance of less than 4 ohms could damage
the unit.
2
BT1611i
Disconnect Battery
Before you begin, disconnect the battery
negative terminal.
Toll-Free Installation Assistance
If you require assistance, contact Technical
Support at 1-800-323-4815 from 8:30 a.m. to
7:00 p.m. EST Monday through Friday and from
9:00 a.m. to 5:00 p.m. EST on Saturday.
(U.S.A. and Canada only.)




 BT1611I
BT1611i
INSTALLATION INSTRUCTIONS
This unit is designed for installation in cars,
trucks and vans with an existing radio opening.
In many cases, a special installation kit will be
required to mount the radio to the dashboard.
These kits are available at electronics supply
stores and car stereo specialty shops. Always
check the kit application before purchasing to
make sure the kit works with your vehicle.
Pre-installation
1. Disconnect Battery
Before you begin, always disconnect the battery
negative terminal.
2. Remove Transport Screws
MONO
EQ
CD1211 CD RECEIVER
SCAN
/
AUX IN
TUNE
Universal Installation Using
Mounting Sleeve
1. Remove the detachable front panel, if it is
attached to the chassis, by pushing the
“Release” button.
2. Slide the mounting sleeve off of the
chassis if it has not already been removed.
If it is locked into position, use the removal
keys (supplied) to disengage it. The
removal keys are depicted on page 5.
3. Check the dashboard opening size by
sliding the mounting sleeve into it. If the
opening is not large enough, carefully cut
or file as necessary until the sleeve easily
slides into the opening. Do not force the
sleeve into the opening or cause it to bend
or bow. Check that there will be sufficient
space behind the dashboard for the radio
chassis.
4. Locate the series of bend tabs along the
top, bottom and sides of the mounting
sleeve. With the sleeve fully inserted into
the dashboard opening, bend as many of
the tabs outward as necessary to firmly
secure the sleeve to the dashboard.
5. Place the radio in front of the dashboard
opening so the wiring can be brought
through the mounting sleeve.
MONO
EQ
CD1211 CD RECEIVER
SCAN
/
AUX IN
TUNE
6. Follow the wiring diagram carefully and
make certain all connections are secure
and insulated with crimp connectors or
electrical tape to ensure proper operation.
7. After completing the wiring connections,
attach the front panel and turn the unit on
to confirm operation (vehicle ignition
switch must be on). If the unit does not
operate, recheck all wiring until the
problem is corrected. Once proper
operation is achieved, turn the ignition
switch off and proceed with final mounting
of the chassis.
8. Carefully slide the radio into the mounting
sleeve, making sure it is right-side-up, until
it is fully seated and the spring clips lock it
into place.
3






Recommended third-party BT1611I Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)