HUB12

For Assys: HUB12 Rev: 07/05 StudioHub+ Model HUB12 Engineered to Break-Out Audio Science Multi-Channel Audio Cards via StudioHub+ / RJ-45 Connectivity Name Mount Channels CAT-5 Pairs Power Link Connectors Versions Product Key HUB12 rack (1 r.u.) 8 Out / 4 In 2 (1,2,3,6) no 12 RJ-45 / 2 BNC (for sync.) 1 MD-50 (for analog) / 1 MD-26 (for digital) Rack-mount only (as pictured) General The Hub12 is specifically engineered to break-out up to 8 stereo output channels and 4 stereo input channels from series 4000, 5000 and 6000 Audio Science professional multi-channel audio cards. Inputs and outputs appear on RJ-45 connectors and conform to the StudioHub+ audio pin-out standard. Front panel high-density MD-50 & MD26 connectors mate with similar connectors on the various ASI cards supported. BNC Synchronous connectors Front panel BNC connectors provide Word-Clock sync inputs and outputs as supported by the individual ASI card models. Insert pins in internal jumpers JU9 & JU10 (center and forward pins towards the BNC connectors) in to activate these connectors. Grounding Information Front panel RJ-45 shields are all normally isolated from each other, but may be connected together via an internal common ground bus. Insert pins in internal jumpers JU1 thru JU8 and JU11 to JU14 in the center and forward pins (towards the RJ-45 connectors) to connect to the chassis ground. Insert the jumper pins in the center and rear pins (away from the RJ-45 connectors) to connect to the common isol...