DatasheetsPDF.com

1.5KE10A Dataheets PDF



Part Number 1.5KE10A
Manufacturers Vishay
Logo Vishay
Description TVS
Datasheet 1.5KE10A Datasheet1.5KE10A Datasheet (PDF)

1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A www.vishay.com Vishay General Semiconductor TRANSZORB® Transient Voltage Suppressors Case Style 1.5KE FEATURES • Glass passivated chip junction • Available in unidirectional and bidirectional • 1500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • AEC-Q101 qualified available • Solder dip 275 °C max. 10 s,.

  1.5KE10A   1.5KE10A


Document
1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A www.vishay.com Vishay General Semiconductor TRANSZORB® Transient Voltage Suppressors Case Style 1.5KE FEATURES • Glass passivated chip junction • Available in unidirectional and bidirectional • 1500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • AEC-Q101 qualified available • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS VBR unidirectional VBR bidirectional VWM unidirectional VWM bidirectional PPPM PD IFSM (unidirectional only) TJ max. Polarity 6.8 V to 540 V 6.8 V to 220 V 5.8 V to 459 V 5.8 V to 185 V 1500 W 6.5 W 200 A 175 °C Unidirectional, bidirectional Package 1.5KE DEVICES FOR BIDIRECTION APPLICATIONS For bidirectional types, use CA suffix (e.g. 1.5KE220CA) Electrical characteristics apply in both directions. TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. MECHANICAL DATA Case: molded epoxy body over passivated junction Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3_X - RoHS compliant, and AEC-Q101 qualified (“X” denotes revision code e.g. A, B, ...) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Note • 1.5KE250A to 1.5KE540A are commercial grade only • Bidirectional is available from 1.5KE6.8CA to 1.5KE220CA only Polarity: for unidirectional types the color band denotes cathode end, no marking on bidirectional types MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1) Peak pulse current with a 10/1000 μs waveform (1) Power dissipation on infinite heatsink at TL = 75 °C (fig. 5) Peak forward surge current 8.3 ms single half sine-wave unidirectional only (2) Maximum instantaneous forward voltage at 100 A for unidirectional only (3) Operating junction and storage temperature range SYMBOL PPPM IPPM PD IFSM VF TJ, TSTG VALUE 1500 See next table 6.5 200 3.5/5.0 -55 to +175 Notes (1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2 (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum (3) VF = 3.5 V for 1.5KE220A and below; VF = 5.0 V for 1.5KE250A and above UNIT W A W A V °C Revision: 09-Aug-2022 1 Document Number: 88301 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) JEDEC® TYPE NUMBER GENERAL SEMICONDUCTOR PART NUMBER BREAKDOWN VOLTAGE VBR AT IT (1) (V) MIN. MAX. TEST STAND-OFF CURRENT VOLTAGE IT VWM (mA) (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (4) (μA) MAXIMUM PEAK PULSE CURRENT IPPM (2) (A) 1N6267A (+)1.5KE6.8A 6.45 7.14 10 5.80 1000 143 1N6268A (+)1.5KE7.5A 7.13 7.88 10 6.40 500 133 1N6269A (+)1.5KE8.2A 7.79 8.61 10 7.02 200 124 1N6270A (+)1.5KE9.1A 8.65 9.55 1.0 7.78 50 112 1N6271A (+)1.5KE10A 9.50 10.5 1.0 8.55 10 103 1N6272A (+)1.5KE11A 10.5 11.6 1.0 9.40 5.0 96.2 1N6273A (+)1.5KE12A 11.4 12.6 1.0 10.2 5.0 89.8 1N6274A (+)1.5KE13A 12.4 13.7 1.0 11.1 5.0 82.4 1N6275A (+)1.5KE15A 14.3 15.8 1.0 12.8 1.0 70.8 1N6276A (+)1.5KE16A 15.2 16.8 1.0 13.6 1.0 66.7 1N6277A (+)1.5KE18A 17.1 18.9 1.0 15.3 1.0 59.5 1N6278A (+)1.5KE20A 19.0 21.0 1.0 17.1 1.0 54.2 1N6279A (+)1.5KE22A 20.9 23.1 1.0 18.8 1.0 49.0 1N6280A (+)1.5KE24A 22.8 25.2 1.0 20.5 1.0 45.2 1N6281A (+)1.5KE27A 25.7 28.4 1.0 23.1 1.0 40.0 1N6282A (+)1.5KE30A 28.5 31.5 1.0 25.6 1.0 36.2 1N6283A (+)1.5KE33A 31.4 34.7 1.0 28.2 1.0 32.8 1N6284A (+)1.5KE36A 34.2 37.8 1.0 30.8 1.0 30.1 1N6285A (+)1.5KE39A 37.1 41.0 1.0 33.3 1.0 27.8 1N6286A (+)1.5KE43A 40.9 45.2 1.0 36.8 1.0 25.3 1N6287A (+)1.5KE47A 44.7 49.4 1.0 40.2 1.0 23.1 1N6288A (+)1.5KE51A 48.5 53.6 1.0 43.6 1.0 21.4 1N6289A (+)1.5KE56A 53.2 58.8 1.0 47.8 1.0 19.5 1N6290A (+)1.5KE62A 58.9 65.1 1.0 53.0 1.0 17.6 1N6291A (+)1.5KE68A 64.6 71.4 1.0 58.1 1.0 16.3 1N6292A (+)1.5KE75A 71.3 78.8 1.0 64.1 1.0 14.6 1N6293A (.


1.5KE10 1.5KE10A 1.5KE11


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)