SH236
Complementary Output
Elektronische Bauelemente
RoHS Compliant Product
Hall Effect Latch Sink Driver IC
Descript...
SH236
Complementary Output
Elektronische Bauelemente
RoHS Compliant Product
Hall Effect Latch Sink Driver IC
Description
The SH236 is an integrated Hall effect latched sensor with output pull-high resistor driver designed for electronic commutation of brushless DC motor applications. The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the Hall voltage, and a Schmitt trigger to provide switching hysteresis for noise rejection, and complementary open-collector drivers for sinking large current loads. An internal bandgap
regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range. If a magnetic flux density larger than threshold Bop, DO is turned on (low) and DOB is turned off (high). The output state is held until a magnetic flux density reversal falls below Brp causing DO to be turned off and DOB turned on. SH236 is rated for operation over o o temperature range from -20 C to 85 C and voltage range from 3.5V to 20V. The devices are available in low cost die forms or rugged 4 pin SIP packages.
Features
* High Output Sinking Capability Up To 200mA For Driving Large Load
REF. A A1 b b1
Millimeter Min.
1.295 0.610 0.330 0.406 0.432 0.508
Max.
1.803
REF. D E L e
Millimeter Min.
5.105 3.531 14 1.27REF
Max.
5.359 3.785 16
* On-Chip Hall Sensor IC With Two Different Sensitivity And Hysteresis Settings For SH236 * Lower Current Change Rate Reduces The Pe...