(XR8051 - XR8054) High Speed Rail-to-Rail Amplifiers
XR8051, XR8052, XR8054
Low Cost, High Speed Rail-to-Rail Amplifiers
General Description
The XR8051 (single), XR8052 (du...
Description
XR8051, XR8052, XR8054
Low Cost, High Speed Rail-to-Rail Amplifiers
General Description
The XR8051 (single), XR8052 (dual) and XR8054 (quad) are low cost, voltage feedback amplifiers. These amplifiers are designed to operate on +3V to +5V, or ±5V supplies. The input voltage range extends 300mV below the negative rail and 0.9V below the positive rail.
The XR8051, XR8052, and XR8054 offer superior dynamic performance with a 260MHz small signal bandwidth and 190V/μs slew rate. The combination of low power, high output current drive, and rail-to-rail performance make these amplifiers well suited for battery-powered systems and video applications.
The combination of low cost and high performance make the XR8051, XR8052, and XR8054 suitable for high volume applications in both consumer and industrial applications such as video surveillance and distribution systems, professional and IPC cameras, active filter circuits, coaxial cable drivers, and electronic white boards.
F E AT U R E S
■■ 260MHz bandwidth ■■ Fully specified at +3V, +5V and ±5V
supplies ■■ Output voltage range:
❏❏ 0.03V to 4.95V; VS = +5; RL = 2kΩ ■■ Input voltage range:
❏❏ -0.3V to +4.1V; VS = +5 ■■ 190V/μs slew rate ■■ 2.6mA supply current per amplifier ■■ ±100mA linear output current ■■ ±125mA short circuit current ■■ XR8051 directly replaces AD8051, AD8091 ■■ XR8052 directly replaces AD8052, AD8092 ■■ XR8054 directly replaces AD8054
A P P L I C AT I O N S
■■ Video driver ■■ Video surveillance and distribution ■■...
Similar Datasheet