Switch Mode Secondary Side Post Regulator
UCC1583 UCC2583 UCC3583
FEATURES • Precision Secondary Side Post
Regulation ...
Switch Mode Secondary Side Post
Regulator
UCC1583 UCC2583 UCC3583
FEATURES Precision Secondary Side Post
Regulation for Multiple Output Power Supplies
Useful for Both Single Ended and Center Tapped Secondary Circuits
Ideal Replacement for Complex Magnetic Amplifier Regulated Circuits
Leading Edge Modulation
Does Not Require Gate Drive Transformer
High Frequency (>500kHz) Operation
Applicable for Wide Range of Output Voltages
High Current Gate Driver (0.5A Sink/1.5A Source)
Average Current Limiting Loop
DESCRIPTION
The UCC3583 is a synchronizable secondary side post
regulator for precision regulation of the auxiliary outputs of multiple output power supplies. It contains a leading edge pulse width modulator, which generates the gate drive signal for a FET power switch connected in series with the rectifying diode. The turn-on of the power switch is delayed from the leading edge of the secondary power pulse to regulate the output voltage. The UCC3583 contains a ramp generator slaved to the secondary power pulse, a voltage error amplifier, a current error amplifier, a PWM comparator and associated logic, a gate driver, a precision reference, and protection circuitry.
The ramp discharge and termination of the gate drive signal are triggered by the synchronization pulse, typically derived from the falling edge of the transformer secondary voltage. The ramp starts charging again once its low threshold is reached. The gate drive signal is turned on when the ramp...