Document
ALUMINUM ELECTROLYTIC CAPACITORS
VY
Wide Temperature Range
series
VZ
Smaller
One rank smaller case sizes than VZ series. Adapted to the RoHS directive (2002/95/EC).
VY
High Temperature
VK
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Performance Characteristics
– 55 ~ +105˚C (6.3 ~ 100V), – 40 ~ +105˚C (160 ~ 400V), – 25 ~ +105˚C (450V) 6.3 ~ 450V 0.1 ~ 68000µF
± 20% at 120Hz, 20˚C
Rated voltage (V) 6.3 ~ 100 After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater.
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
www.DataSheet4U.com
Leakage Current
160 ~ 450
After 1 minute's application of rated voltage, CV < = 1000 : I = 0.1CV+40 (µA) or less After 1 minute's application of rated voltage, CV > 1000 : I = 0.04CV+100 (µA) or less Measurement frequency : 120Hz, Temperature : 20˚C
tan δ
Rated voltage (V) tan δ (MAX.)
6.3 0.28
10 0.24 6.3 5 10
16 0.20 10 4 8
25 0.16 16 3 6
35 0.14 25 2 4
50 0.12 35~ 50 2 3
63 0.10
100 0.08
160 ~ 250 350 ~ 450 0.20 0.25 400 6 10 450 15
Measurement frequency : 120Hz
Stability at Low Temperature
Rated voltage ( V) Impedance ratio Z– 25˚C / Z+20˚C ZT / Z20 (MAX.) Z– 40˚C / Z+20˚C
63~ 100 160 ~ 200 250 ~ 350 2 3 4 3 4 8
Endurance
After 1000 hours' application of rated voltage at 105˚C, capacitors meet the characteristic requirements listed at right.
Capacitance change tan δ Leakage current
Within ±20% of initial value 200% or less of initial specified value Initial specified value or less
Shelf Life Marking
After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on black sleeve.
Radial Lead Type
Sleeve (P.E.T.)
Type numbering system (Example : 10V 330µF)
φd
1 2 3 4 5 6 7 8 9 10 11
UV Y 1 A 3 3 1 MED
MAX
P ± 0.5
φD+
Configuration Capacitance tolerance (±20%) Rated Capacitance (330µF)
Pressure relief vent (φ6.3up)
Rated voltage (10V)
L+
MAX
15MIN
4MIN
Series name Type
(mm)
φD P φd
Configuration φD 5 6.3 8 · 10 12.5 ~ 18 20 ~ 25
Pb-free leadwire Pb-free PET sleeve
5 2.0 0.5 0.5
6.3 2.5 0.5 0.5
8 3.5 0.6 0.5
10 5.0 0.6 0.5
12.5 5.0 0.6 0.5
16 7.5 0.8 0.5
18 7.5 0.8 0.5
20 10.0 1.0 0.5
22 10.0 1.0 1.0
25 12.5 1.0 1.0
DD ED PD HD RD
(L < 20) 1.5 (L 20) 2.0
• Please refer to page 21 about the end seal configulation.
Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity.
Dimension table in next page.
CAT.8100V
ALUMINUM ELECTROLYTIC CAPACITORS
VY
Cap.(µF)
series
Dimensions
V
6.3 0J
10 1A
16 1C
25 1E
35 1V
50 1H 5 × 11 .