DatasheetsPDF.com

E3JK-R2M12M Dataheets PDF



Part Number E3JK-R2M12M
Manufacturers Omron
Logo Omron
Description Power Supply Photoelectric Sensor
Datasheet E3JK-R2M12M DatasheetE3JK-R2M12M Datasheet (PDF)

Built-in Power Supply Photoelectric Sensor E3JM/E3JK CSM_E3JM_E3JK_DS_E_9_1 Two Models Contribute to Overall Cost Reduction E3JM Terminal Block Models • Easy to wire and adjust. E3JK Pre-wired Models • Slim body is economically priced and full of functions. Be sure to read Safety Precautions on page 10. Ordering Information Sensors (Refer to Dimensions on page 12.) E3JM Sensing method Appearance Connection method Sensing distance Operation mode Output Functions configuration --Relay Throughb.

  E3JK-R2M12M   E3JK-R2M12M


Document
Built-in Power Supply Photoelectric Sensor E3JM/E3JK CSM_E3JM_E3JK_DS_E_9_1 Two Models Contribute to Overall Cost Reduction E3JM Terminal Block Models • Easy to wire and adjust. E3JK Pre-wired Models • Slim body is economically priced and full of functions. Be sure to read Safety Precautions on page 10. Ordering Information Sensors (Refer to Dimensions on page 12.) E3JM Sensing method Appearance Connection method Sensing distance Operation mode Output Functions configuration --Relay Throughbeam (Emitter + Receiver) * Terminal block Retroreflective with MSR function Diffusereflective Timer Red light Infrared light Model 10 m Light-ON Dark-ON (switch selectable) DC SSR --- Timer Relay --Timer 4m E39-R1 (provided) DC SSR Relay --Timer --Timer 700 mm DC SSR --Timer E3JM-10M4-N Emitter E3JM-10L-N Receiver E3JM-10DM4-N E3JM-10M4T-N Emitter E3JM-10L-N Receiver E3JM-10DM4T-N E3JM-10S4-N Emitter E3JM-10L-N Receiver E3JM-10DS4-N E3JM-10S4T-N Emitter E3JM-10L-N Receiver E3JM-10DS4T-N E3JM-R4M4 E3JM-R4M4T E3JM-R4S4 E3JM-R4S4T E3JM-DS70M4 E3JM-DS70M4T E3JM-DS70S4 E3JM-DS70S4T * Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver. Orders for individual Emitters and Receivers are accepted. Free Datasheet http://www.datasheetlist.com/ 1 E3JM/E3JK E3JK Sensing method Appearance Connection method Sensing distance Operation mode Light-ON Throughbeam (Emitter + Receiver) *1 Relay Output configuration Model E3JK-5M1-N 2M Emitter E3JK-5L-N 2M Receiver E3JK-5DM1-N 2M E3JK-5M2-N 2M Emitter E3JK-5L-N 2M Receiver E3JK-5DM2-N 2M E3JK-5S3-N 2M Emitter E3JK-5L-N 2M Receiver E3JK-5DS3-N 2M E3JK-R2M1 2M E3JK-R2M2 2M E3JK-R2S3 2M E3JK-R4M1 2M E3JK-R4M2 2M E3JK-R4S3 2M E3JK-DS30M1 2M E3JK-DS30M2 2M E3JK-DS30S3 2M 5m Dark-ON Light-ON Dark-ON Both DC SSR selectable Relay Both DC SSR selectable Relay Both DC SSR selectable Relay Both DC SSR selectable Retro-reflective with MSR function Retro-reflec- E39-R1 (provided) tive without MSR function Pre-wired (2 m) *2 2.5 m (3 m) *2 4m (5 m) Diffusereflective 300 mm Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON Note: UL-listed models have the -US suffix. Through-beam models have -US suffix instead of -N suffix. (Example: E3JM-10M4-US 2M). Tightening nuts, washers, and rubber bushings are not provided with these models. Change: Shape of the E3JM conduit socket Note, however, that DC-type E3JK SSR Output Models are not UL-listed. *1. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver. Orders for individual Emitters and Receivers are accepted. *2. Values in parentheses indicate the sensing distance when using E39-R2 Reflectors. Accessories (Order Separately) Slit (A Slit is not provided with the Sensor for through-beam. Order a Slit separately if required.) (Refer to Dimensions on page 12.) Slit width Sensing distance E3JM-10@4(T)-N 1 mm × 20 mm E3JK-5@@-N 0.7 m Minimum detectable object (typical) Model Quantity Remarks 1.2 m 1-mm dia. E39-S39 1 Slit each for the Emitter and Receiver (2 Slits total) (Seal-type long slit) Can be used with the E3JM-10@4(T)-N and E3JK-5@@-N Through-beam Models. Reflectors (A Reflector is required for Retroreflective Sensors.) A Reflector is provided with the E39-R1 Sensor. For other Sensors, order a Reflector separately if required. (Refer to Dimensions on E39-L/F39-L/E39-S/E39-R.) Name Sensing distance (typical) E3JM-R4@4(T) E3JK-R2@@ Reflectors E3JK-R4@@ E3JK-R2@@ E3JK-R4@@ Small Reflectors E3JM-R4@4(T) E3JK-R2@@ E3JM-R4@4(T) E3JK-R2@@ Tape Reflectors E3JM-R4@4(T) E3JK-R2@@ E3JM-R4@4(T) E3JK-R2@@ 4 m (rated value) 2.5 m (rated value) 4 m (rated value) 3m 5m 3.5 m 1 m (5 mm) * 1 m (200 mm) * 750 mm (200 mm) * 1.6 m (200 mm) * 1.2 m (200 mm) * 2 m (200 mm) * 1.5 m (200 mm) * E39-R2 1 E39-R1 1 Model Quantity Remarks Provided with the E3JM-R4@4(T) Provided with the E3JK-R2@@ Provided with the E3JK-R4@@ --- E39-R3 1 --- E39-RS1 1 E39-RS2 1 Enables MSR function. E39-RS3 1 Note: 1. When using any reflector other than the provided one, use a sensing distance of approximately 0.7 times the typical value as a guide. 2. Refer to Reflectors on E39-L/F39-L/E39-S/E39-R for details. * Values in parentheses are the minimum required distance between the Sensor and Reflector. Free Datasheet http://www.datasheetlist.com/ 2 E3JM/E3JK Mounting Bracket Some Mounting Brackets are provided with the Sensor. Order other Mounting Brackets separately if required. (Refer to E39-L/F39-L/E39-S/E39-R) Appearance Model Quantity Remarks E39-L53 1 Provided with the E3JM. E39-L40 1 Provided with the E3JK. E39-L51 1 Mounting Bracket designed for changing from he E3A-M, E3A2, E3A3, OA-5, or OA-5N to the E3JM. Note: 1. When using a Through-beam Sensor, order one Connector for the Receiver and one for the Emitter. 2. Refer to Mounting Brackets on E39-L/F39-L/E39-S/E39-R for details. Free Datasheet http://www.datasheet.


E3JK-5S3-N2M E3JK-R2M12M E3JK-R2M22M


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)