Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors/ FP Surface Mount Type
Series:
FP
Type:
V
FP High temperature Lead-Free reflow (suffi...
Description
Aluminum Electrolytic Capacitors/ FP Surface Mount Type
Series:
FP
Type:
V
FP High temperature Lead-Free reflow (suffix:A✽)
● ● ● ●
■ Features
Low ESR (30 % to 50 % less than FK series) Endurance: 2000 h at 105 °C Vibration-proof product is available upon request. (φ8 <) RoHS directive compliant
■ Specifications
Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ W.V. (V) Characteristics at Low Temperature Z(–25 °C)/Z(+20 °C) Z(–40°C)/Z(+20 °C) Z(–55°C)/Z(+20 °C) 6.3 2 3 4 –55 °C to +105 °C 6.3 V.DC to 35 V.DC 10 µF to 1800 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (whichever is greater) Please see the attached standard products list 10 2 3 4 16 2 3 4 25 2 3 3 35 2 3 3 (Impedance ratio at 120 Hz)
After applying rated working voltage at +105 °C ±2 °C for 2000 hours the capacitors shall meet the limits specified below. Post-test requirement at +20 °C
Endurance
Capacitance change
tan δ
±30 % of initial measured value < 200 % of initial specified value < initial specified value
DC leakege current
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Resistance to Soldering Heat
Capacitance change tan δ DC leakage current
±10 % of initial measured value < i...
Similar Datasheet