Document
Solid State Lighting
Mid- and High-Power LEDs, LED-Modules and Color Management
Your Imagination, Our Innovation Sense • Illuminate • Connect
Free Datasheet http://www.datasheetlist.com/
Solid-State Lighting
Mid- and High-Power LEDs
0.5 Watt Mid-Power PLCC-4 Surface Mount LEDs
Description
The superior design of this high-reliability LED package is based on the industry standard PLCC-4 platform (3.2x2.8x1.9mm) and enables a higher drive current of 150mA. Higher drive current is possible due to the enhanced heat dissipation capability which also allows you to operate the LED at up to +110°C ambient temperature. The package is highly reliable and has a long lifetime with minimum degradation due to enhanced silicone resin material and the very low thermal resistance of only 60K/W (junction-to-pin). On the white colors, Avago introduced a new, tighter color binning to cater to the demands of lighting customers. The high light output at a wide viewing angle (120 degree) provides a good light mixing even at a short distance from the package. All this makes it an ideal light source for decorative and general illumination applications, channel or counter lighting as well as advertisement panel backlighting. The small size of the PLCC-4 platform package enables higher packaging density over a given area compared to other half-Watt solutions available on the market. This, for example, helps to significantly increase the resolution of a screen in a signage application.
0.5 Watt PLCC-4
0.5 Watt Cool White PLCC-4
Typical Applications
0.5 Watt Warm White PLCC-4
Features
• Decorative and mood lighting • Channel and counter lighting • Advertisement panel backlighting • Battery powered reading lamps and flashlights • Interior automotive: Dome, map, and reading lamps, glove compartment illumination • Exterior automotive: Tail lights and side repeater • Display backlighting • Signage
• 0.5 Watt mid-power enhanced PLCC-4 package • Thermal Resistance: 60 K/W • High junction temperature: 125 °C • Robust operating temperature: -40 to +110 °C • Compatible with IR and TTW soldering processes • Super wide viewing angle: 120° • JEDEC moisture sensitivity level (MSL) 2a (4 weeks of floor life) • AEC-Q101 qualified • Available Colors: cool white, warm white, blue, green, amber, red-orange, red
Color Cool White Warm White Amber Red Orange Red Blue Green Notes:
Wavelength / CCT 4500K – 10000K 2700K – 4700K 583nm – 598nm 611nm – 625nm 620nm – 635nm 460nm – 480nm 515nm – 535nm
Part Number ASMT-QYBE-NEG0E ASMT-QAB2-FDE0E ASMT-QHB2-FEF0E ASMT-QRB2-FCD0E ASMT-QBBE-N0B0E ASMT-QGBE-NEG0E
Min. Flux (Im) 11.5 9.0 11.5 7.0 3.4 11.5
Typ. Flux (Im) 19.5 18.0 11.4 14.0 9.8 4.8 17.0
Max. Flux (Im) 33.0 25.5 15.0 19.5 11.5 7.0 25.5
Test Current (mA) 150 150 150 150 150 150 150
Die Technology InGaN InGaN AlInGaP AlInGaP AlInGaP InGaN InGaN
ASMT-QWBE-NFH0E 15.0
1. ΦV is the total luminous flux output as measured with an integrating shere at mono.