DatasheetsPDF.com

VEP15US24 Dataheets PDF



Part Number VEP15US24
Manufacturers XP
Logo XP
Description 836 Watts AC-DC
Datasheet VEP15US24 DatasheetVEP15US24 Datasheet (PDF)

AC DC 8 36 Watts VEP Series • • • • • • • xppower.com Efficiency Efficiency Level V (24 W Level IV) CEC2008 & EISA 2007 Compliant IT & Medical Approvals Interchangeable Input Connectors Output Voltages from 5 V to 24 V Available Class II Construction Low Cost Specification Input Input Voltage • 8 & 15W: 80-264 VAC 24 W: 80-264 VAC, derate output power 25% <90 VAC 36 W: 90-264 VAC • 47-63 Hz • 8 W: 0.3 A max at 90 VAC 15 W: 0.5 A max at 90 VAC 24 W: 0.6 A max at 90 VAC 36 W: 0.9 A max at 90 V.

  VEP15US24   VEP15US24


Document
AC DC 8 36 Watts VEP Series • • • • • • • xppower.com Efficiency Efficiency Level V (24 W Level IV) CEC2008 & EISA 2007 Compliant IT & Medical Approvals Interchangeable Input Connectors Output Voltages from 5 V to 24 V Available Class II Construction Low Cost Specification Input Input Voltage • 8 & 15W: 80-264 VAC 24 W: 80-264 VAC, derate output power 25% <90 VAC 36 W: 90-264 VAC • 47-63 Hz • 8 W: 0.3 A max at 90 VAC 15 W: 0.5 A max at 90 VAC 24 W: 0.6 A max at 90 VAC 36 W: 0.9 A max at 90 VAC • 70 A max at 230 VAC, cold start at 25 °C • EN61000-3-2, class A • <0.3 W General Efficiency Energy Efficiency Isolation Switching Frequency MTBF • See tables • Level V Level IV (24 W versions) • 8 - 24 W: 4000 VAC Input to Output, 36 W: 3000 VAC Input to Output • 8 & 15 W: 132 kHz typical, 24 & 36 W: 65 kHz typical • 8 - 24 W: 250 kHrs, 36 W: 200 kHrs to MIL-HDBK-217F at 25°C, GB Input Frequency Input Current Inrush Current Power Factor No Load Input Power Environmental Operating Temperature Cooling Operating Humidity Storage Temperature Shock Vibration • • • • • 0 ˚C to +40 ˚C Natural convection 5-95% RH, non-condensing -20 ˚C to +60 ˚C Able to survive 1 m drop onto concrete on each of 6 axes • 10-300 Hz, 1 g 15 mins/sweep. 30 mins for each of 3 axes Output Output Voltage Initial Set Accuracy Minimum Load Start Up Delay Start Up Rise Time Hold Up Time Line Regulation Load Regulation Transient Response • • • • • • • • • See tables ±5% at 50% load No minimum load required 2 s typical 8 & 15 W: 100 ms typical, 24 & 36 W: 50 ms typical 5 ms typical at full load and 115 VAC ±0.5% max ±5% max 4% max. deviation, recovery to <1% within 500 µs for a 50% step load change at 0.2 A/µs See tables See tables 120-280% Trip and restart (hiccup mode) 0.2 %/˚C EMC & Safety Emissions Harmonic Currents Voltage Flicker ESD Immunity Radiated Immunity EFT/Burst Surge Conducted Immunity Magnetic Field Dips & Interruptions Safety Approvals • • • • • • • • • • • EN55022, class B conducted & radiated EN61000-3-2, class A EN61000-3-3 EN61000-4-2, ±4 kV contact, ±8 kV air, Perf Criteria A EN61000-4-3, 3 V/m, Perf Criteria A EN61000-4-4, level 2, Perf Criteria A EN61000-4-5, installation class 3, Perf Criteria A EN61000-4-6, 3 V, Perf Criteria A EN61000-4-8, 1 A/m, Perf Criteria A EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms, Perf Criteria A, B, B 8 & 15 W: EN60950-1, cUL60950-1, IEC60950-1, EN60601-1, cUL60601-1, IEC60601-1; 24 W: EN60950-1, cCSAus60950-1, IEC60950-1, CSA60950-01-03, cCSAus60601-1, UL60601-1, IEC60601-1, CSA C22.2 No601.1, 36 W: IEC60950-1, EN60950-1, UL60950-1 Ripple & Noise Overvoltage Protection Overload Protection Short Circuit Protection Temperature Coefficient • • • • • Free Datasheet http://www.datasheetlist.com/ AC DC Models and Ratings Output Power 8.0 W 8.0 W 8.0 W 8.0 W 10.0 W 12.6 W 15.0 W 15.0 W 15.0 W Notes Output Voltage(2) 5.0 V 9.0 V 12.0 V 15.0 V 5.0 V 9.0 V 12.0 V 15.0 V 24.0 V Output Current 1.60 A 0.88 A 0.66 A 0.53 A 2.00 A 1.40 A 1.25 A 0.90 A 0.63 A Ripple & Noise(1) 150 mV 200 mV 200 mV 200 mV 50 mV 100 mV 100 mV 150 mV 200 mV Overvoltage Trip(5) 10.0 V 18.0 V 20.0 V 25.0 V 9.0 V 15.0 V 20.0 V 25.0 V 35.0 V VEP08/15 Efficiency(4) 74% 77% 77% 78% 75% 80% 82% 84% 83% Model Number(3) VEP08US05 VEP08US09 VEP08US12 VEP08US15 VEP15US05 VEP15US09 VEP15US12 VEP15US15 VEP15US24 1. Measured at end of DC output lead using 20 MHz bandwidth and 0.1 µF ceramic capacitor in parallel with 10 µF electrolytic capacitor placed at connector terminals. 2. VEP08 models: Other voltages between 3.0 V and 18.0 V are available on request, consult sales for details. VEP15 models: Other voltages between 3.0 V and 24.0 V are available on request, consult sales for details. 3. A suffix denoting the type of mains plug required must be added to the part number. See below. 4. Efficiency given is the average of efficiencies measured with output loads of 25%, 50%, 75% and 100%. 5. VEP08 models: Typical trip point, VEP15 models: Maximum trip point. Mechanical Details VEP08: 1.06 (26.8) VEP15: 1.20 (30.5) VEP08: 2.83 (72.0) VEP15: 2.95 (75.0) 70.87 ± 10% (1800 ±10%) Output Plug: ø 5.5 x ø 2.5 x 11.0 mm Inner Positive VEP08: 1.67 (42.4) VEP15: 1.81 (46.0) Notes 1. 2. 3. 4. 5. UK Add suffix ‘-UK’ EU Add suffix ‘-EU’ China Add suffix ‘-CN’ USA Add suffix ‘-US’ Australia Add suffix ‘-AU’ All dimensions in inches (mm). Tolerance is ±0.04 (±1) maximum, except output cable length. Weight: VEP08 - 0.18 lbs (80 g) approx., VEP15 - 0.26 lbs (120 g) approx. Case material is PC Class 94 V-0 Output Lead: UL2468 18-24 AWG Mains plugs can be ordered separately. Part numbers are: VEP PLUG UK, VEP PLUG EU, VEP PLUG CN^, VEP PLUG US or VEP PLUG AU^ Free Datasheet http://www.datasheetlist.com/ AC DC Models and Ratings Output Power 12.5 W 19.8 W 24.0 W 24.0 W 24.0 W Notes Output Voltage(3) 5.0 V 9.0 V 12.0 V 15.0 V 24.0 V Output Current 2.5 A 2.2 A 2.0 A 1.6 A 1.0 A Ripple & Noise(1) 100 mV 100 mV 100 mV 100 mV 100 mV Ove.


VEP15US15 VEP15US24 VEP24US05


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)