SAW Filter
SF2059B-1
• Low Insertion Loss • 5.0 x 7.0 mm Surface-Mount Case • Complies with Directive 2002/95/EC (RoHS)
Pb
Absolut...
Description
SF2059B-1
Low Insertion Loss 5.0 x 7.0 mm Surface-Mount Case Complies with Directive 2002/95/EC (RoHS)
Pb
Absolute Maximum Ratings Rating
Maximum Incident Power in Passband Maximum DC Voltage Between any 2 Terminals Storage Temperature Range Maximum Soldering Temperature
137.50 MHz SAW Filter
Value
+10 30 -40 to +85 265°C for 10 s
Units
dBm VDC °C
SMP-03 Electrical Characteristics Characteristic
Nominal Center Frequency Minimum Insertion Loss 1 dB Bandwidth 3 dB Bandwidth Amplitude Ripple, 137.1 to 137.9 MHz 40 dB Bandwidth Operating Temperature Range Input and Output Impedance Case Style Lid Symbolization (YY=year, WW=week, S=shift) See note 4
Sym
fC IL BW1 BW3
Notes
1 1, 2 1 1, 2
Min
Typ
137.50 8.3 0.86 1.0 0.85
Max
9.1
Units
MHz dB MHz
0.80
TA
1
5
1.3 dBP-P 7.0 MHz -40 +85 °C L-C Match to 50 ohms SMP-03 7 x 5 mm Nominal Footprint RFM SF2059B-1 YYWWS##
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes:
1. 2. 3. 4. 5. 6. 7. 8. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. The design, manufacturing process, and specifications of this filter are subject to change. Tape and Reel Standard Per ANSI / EIA 481. Either Port 1 or Port 2 may be used for either i...
Similar Datasheet