DatasheetsPDF.com

D2SW-3L1H Dataheets PDF



Part Number D2SW-3L1H
Manufacturers Omron
Logo Omron
Description Watertight Miniature Basic Switch
Datasheet D2SW-3L1H DatasheetD2SW-3L1H Datasheet (PDF)

Watertight Miniature Basic Switch A High-quality Watertight Miniature Basic Switch Conforms to IP67 Monoblock construction assures high sealing capability and is ideal for dusty places or where water is sprayed. A wide operating temperature range of –40°C to 85°C is ideal for any operating environment. Ideal for the automobile, agricultural machinery, automatic vending machine, refrigerator, icemanufacturing, bath equipment, hot-water supply, air conditioner, and factory machine industries, whic.

  D2SW-3L1H   D2SW-3L1H


Document
Watertight Miniature Basic Switch A High-quality Watertight Miniature Basic Switch Conforms to IP67 Monoblock construction assures high sealing capability and is ideal for dusty places or where water is sprayed. A wide operating temperature range of –40°C to 85°C is ideal for any operating environment. Ideal for the automobile, agricultural machinery, automatic vending machine, refrigerator, icemanufacturing, bath equipment, hot-water supply, air conditioner, and factory machine industries, which require highly environment-resistive capabilities. D2SW RC Model V DE Ordering Information Actuator Pin p plunger u ge Solder terminals Tab terminals (#110) PCB terminals With lead wires Hinge ge lever e e Solder terminals Tab terminals (#110) PCB terminals With lead wires Simulated S u a ed hinge ge lever e e Solder terminals Tab terminals (#110) PCB terminals With lead wires Hinge ge roller o e lever e e Solder terminals Tab terminals (#110) PCB terminals With lead wires Note: D2SW-3H D2SW-3T D2SW-3D D2SW-3M (see note 3) D2SW-3L1H D2SW-3L1T D2SW-3L1D D2SW-3L1M (see note 3) D2SW-3L3H D2SW-3L3T D2SW-3L3D D2SW-3L3M (see note 3) D2SW-3L2H D2SW-3L2T D2SW-3L2D D2SW-3L2M (see note 3) 3A D2SW-01T D2SW-01D D2SW-01M (see note 3) D2SW-01L1H (see note 2) D2SW-01L1T D2SW-01L1D D2SW-01L1M (see note 3) D2SW-01L3H (see note 2) D2SW-01L3T D2SW-01L3D D2SW-01L3M (see note 3) D2SW-01L2H (see note 2) D2SW-01L2T D2SW-01L2D D2SW-01L2M (see note 3) 0.1A D2SW-01H (see note 2) 1. The standard lengths of the lead wires (AV0.5f) of models incorporating them are 30 cm. 2. EN61058-1 (IEC1058-1) approved by VDE. 3. UL/CSA approved lead-wired models use UL/CSA approved lead wire. Model name changes from D2SW-jM to D2SW-jMS. Distributed by: Diamond Electronics Ltd Tel: +44(0)1477 500450 Fax: +44(0)1477 500656 Mail: [email protected] Web: www.diamondelec.co.uk 127 Free Datasheet http://www.datasheetlist.com/ D2SW D2SW Specifications Ratings Non-inductive load Resistive load Model D2SW-3 Rated voltage 125 VAC 250 VAC 30 VDC D2SW-01 Note: 125 VAC 30 VDC 3A 2A 3A 0.1 A 0.1 A NC NO 1A 0.5 A 1A ----Lamp load NC NO 0.5 A 0.3 A NC 1 A 0.5 A 1A ----Inductive laod Inductive load NO 0.5 A 0.3 A 1A 0.5 A 1A ----Motor load NC NO 0.5 A 0.3 A 1. The above current ratings are the values of the steady-state current. 2. Inductive load has a power factor of 0.7 min. (AC) and a time constant of 7 ms max. (DC). 3. Lamp load has an inrush current of 10 times the steady-state current. 4. Motor load has an inrush current of 6 times the steady-state current. Approved Standards UL (File No. E32667)/CSA (File No. LR21642) D2SW-3j: 3 A at 125 VAC, 2 A at 250 VAC D2SW-01j: 0.1 A at 125 VAC, 0.1 A at 30 VDC VDE (Licence No. 85002)/EN61058-1 (IEC1058-1) Approved D2SW-01jH: 0.1 A at 125 VAC Contact Item Specification Material Rivet Silver D2SW-3 Crossbar Gold alloy D2SW-01 Contact Form COM NO NC (Black*) (Blue*) (Red*) *Indicates the color of the lead wire. Distributed by: Diamond Electronics Ltd Tel: +44(0)1477 500450 Fax: +44(0)1477 500656 Mail: [email protected] Web: www.diamondelec.co.uk 128 Free Datasheet http://www.datasheetlist.com/ D2SW Characteristics Item Operating speed (see note) Operating frequency Insulation resistance Contact resistance Dielectric strength D2SW-3 0.1 mm to 1 m/s (at pin plunger) Mechanical: 300 operations/min Electrical: 60 operations/min 100 MΩ min. (at 500 VDC) 50 mΩ max. (initial value) for lead wire models 1,000 VAC, 50/60 Hz for 1 min between contacts of the same polarity 1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each terminal and non-current-carrying metal part NO: 10 A NC: 20 A Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Malfunction: 300 m/s2 (approx. 30G) Mechanical: 5,000,000 operations min. (OT value) Electrical: 200,000 operations min. (3 A at 125 VAC), 100,000 operations min. (2 A at 250 VAC) Operating: –40°C to 85°C (with no icing) Operating: 95% max. IP67 for lead wire models IP50 for terminal models Terminal model: 2 g, Lead wire model: 10 g Mechanical: 5,000,000 operations min. (OT value) Electrical: 200,000 operations min. D2SW-01 D2SW 70 mΩ max. (initial value) for lead wire models 600 VAC, 50/60 Hz for 1 min between contacts of the same polarity 1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each terminal and non-current-carrying metal part NO: 1 A NC: 1 A Inrush current Vibration resistance Shock resistance Life expectancy Ambient temperature Ambient humidity Enclosure ratings Weight Note: The operating speed value shown is for pin plunger models. For hinge lever models, this speed is for the plunger parts. VDE-approved Characteristics (EN61058-1) Degree of protection against electric shock Ambient temperature Operating cycles Proof tracking index (PTI) Switch category (IEC335-1) Class 1 0°C to 85°C 50,000 175 V A Operating Characteristics Type Pin plunger D2SW-3j D2SW-01j OF max. RF min. PT m.


D2SW-3M D2SW-3L1H D2SW-3L1T


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)