Document
Product Specification
AU OPTRONICS CORPORATION
M270HW01 V2
( ) Preliminary Specification (V ) Final Specification Module Model Name 27” Color TFT-LCD M27HW01 V2 open cell
Customer
Date
Approved by
Date
Howard Lee
Sep 3, 2013
Approved by
Prepared by
Date
EvelynPHSung
Sep 3, 2013
Note: This Specification is subject to change without notice.
AU Optronics corporation
document version 1.0
1
Free Datasheet http://www.datasheetlist.com/
Product Specification
AU OPTRONICS CORPORATION
M270HW01 V2
Contents 1 Handling Precautions................................................................4 2 General Description ..................................................................5
2.1 Display Characteristics....................................................................................................... 5 2.2 Absolute Maximum Rating of Environment ........................................................................ 6 2.3 Optical Characteristics ....................................................................................................... 7
3 TFT-LCD Module ......................................................................10
3.1 Block Diagram.................................................................................................................. 10 3.2 Interface Connection........................................................................................................ 11 3.2.1 Connector Type............................................................................................................. 11 3.2.2 Connector Pin Assignment............................................................................................ 11 3.3 Electrical Characteristics.................................................................................................. 13 3.3.1 Absolute Maximum Rating ............................................................................................ 13 3.3.2 Recommended Operating Condition............................................................................. 13 3.4 Signal Characteristics ...................................................................................................... 14 3.4.1 LCD Pixel Format.......................................................................................................... 14 3.4.2 LVDS Data Format ........................................................................................................ 14 3.4.3 Color versus Input Data ................................................................................................ 15 3.4.4 LVDS Specification........................................................................................................ 16 3.4.5 Input Timing Specification ............................................................................................. 18 3.4.6 Input Timing Diagram.................................................................................................... 19 3.5 Power ON/OFF Sequence ............................................................................................... 20
4 Reliability Test ........................................................................21 5 Shipping Label ........................................................................22 6 Mechanical Characteristic .......................................................23
document version 1.0
2
Free Datasheet http://www.datasheetlist.com/
Product Specification
AU OPTRONICS CORPORATION
M270HW01 V2
Record of Revision
Version Date Page Old description New Description Remark
0.0
2013/9/03
All
First version release
-
document version 1.0
3
Free Datasheet http://www.datasheetlist.com/
Product Specification
AU OPTRONICS CORPORATION
M270HW01 V2
1 Handling Precautions Since front polarizer is easily damaged, pay attention not to scratch it. Wipe off water drop immediately. Long contact with water may cause discoloration or spots. When the cell surface is soiled, wipe it with absorbent cotton or other soft cloth. Since the cell is made of glass, it may break or crack if dropped or bumped on hard surface. Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. 6) Do not press or pat the panel surface by fingers, hand or tooling. 7) Please handle TFT cell with care. The FPCs can only sustain for quite limited stress. 8) The cell package tray is packed in clean room. Please do pack & unpack it in clean room. 9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface Connector of the TFT cell. 10) Pls avoid touching COF position while you are doing mechanical design. 11) When storing modules as spares for a long time, the following precaution is necessary: Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the temperature between 5℃ and 35℃ at normal humidity. 1) 2) 3) 4) 5)
document version 1.0
4
Fre.