SD705

SD705/ 706/ 707/ 708: FAMILY OF TINY ROBUST SINGLE AXIS GYROSCOPES FOR HIGH END APPLICATIONS The low cost gyroscopes with SP-Interface provide a stable rate signal in the short as well as the long time range due to their good noise performance making them well suited for ambitious measurement and control applications. Tiny QFN40 package of only 6x6x2 mm³ Temperature operating range -40°C to +85°C Fully calibrated over the whole operating temperature range Continuously working self diagnosis Sensitive gyroscope axis either in-plane or out-of-plane Simultaneously two measurement ranges of ±100°/s and ±300°/s Provide over range up to ±128°/s and ±512°/s, respectively Available as 3.3V or 5V version PRODUCT SELECTION TABLE PART NAME GYROSCOPE AXIS SD705 SD706 SD707 SD708 X Z X Z SUPPLY VOLTAGE 3.3V 3.3V 5V 5V OPERATION SPECIFICATION PARAMETER MIN Supply voltage Supply current Start up time SPI communication speed 3.10 (4.75) 100 MAX 3.50 (5.25) 18 (20) 400 10000 UNIT V mA ms kHz CONDITION 5V version in brackets over full temp. range -40 to +85°C including start up checks 64 bit telegram GYROSCOPE PERFORMANCE (max values over full temperature range) PARAMETER MR1 MR2 UNIT CONDITION Calibrated measurement range Output value range Resolution RMS noise Bandwidth (-3dB) Zero rate bias at RT Total zero rate bias Sensitivity error Linearity error Cross axis sensitivity Recovery time after over range Acceleration cross sensitivity ± 100 ± 128 0.0039 0.3 10 ± 1.5 ±5 ± 5.0 ±1 ± 2.0 ...