EE-SPX406-W2A

Slot-type Photomicrosensor with Cable EE-SPX-W Photomicrosensor with built-in amplifier and attached cable reduces external light interference. Light modulation effectively reduces external light interference. Wide operation voltage range: 5 to 24 VDC Easy operation monitoring with bright light indicator. CSM_EE-SPX-W_DS_E_4_2 Be sure to read Safety Precautions on page 3. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Ordering Information Appearance Sensing method Sensing distance (slot width) 3.6 mm Output Output type configuration Dark-ON Light-ON Through-beam type 3.6 mm 3.6 mm Dark-ON NPN output Light-ON Dark-ON Light-ON 5 mm * These models (EE-SPX305/405-W2A only) are not conformed to CE standards. Dark-ON Light-ON Cable length 1m Infrared light Model EE-SPX302-W2A 1M EE-SPX402-W2A 1M EE-SPX304-W2A 1M EE-SPX404-W2A 1M EE-SPX306-W2A 1M EE-SPX406-W2A 1M EE-SPX305-W2A 1M* EE-SPX405-W2A 1M* 1 Ratings and Specifications EE-SPX-W Item Models EE-SPX302-W2A, EE-SPX402-W2A EE-SPX304-W2A, EE-SPX404-W2A EE-SPX306-W2A, EE-SPX406-W2A Sensing distance 3.6 mm (slot width) Sensing object Opaque: 1 × 0.5 mm min. Differential distance 0.05 mm max. EE-SPX305-W2A EE-SPX405-W2A 5 mm (slot width) Opaque: 2 × 0.8 mm min. *1. The indicator is a GaP red LED (peak wavelength: 700 nm). *2. The response frequency was measured by detecting the following rotating disk. Light source GaAs i...