|
|
PHOTOTRANSISTOR PHOTOCOUPLER. FL817 Datasheet |
|
|
|
FL817 Series
4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER
Features:
• Current transfer ratio
(CTR:MIN.50% at IF =5mA ,VCE =5V)
High isolation voltage between input and output
(Viso=5000 V rms )
• Compact dual-in-line package
FL817*:1-channel type
• Pb free
Options available:
• Leads with 0.4”(10.16mm) spacing (M Type)
• Leads bends for surface mounting (S Type)
• Tape and Reel of TypeⅠ for SMD(Add”-TA” Suffix)
• Tape and Reel of TypeⅡ for SMD(Add”-TB” Suffix)
• The tape is 16mm and is wound on a 33cm reel
Applications:
• Computer terminals
• System appliances, measuring instruments
• Registers, copiers, automatic vending machines
• Cassette type recorder
• Electric home appliances, such as fan heaters, etc.
• Signal transmission between circuits of different potentials
and impedances
Device Selection Guide
Part. No.
Chip Material
IR PT
FL817*
GaAs
Silicon
FANGJING TECHNOLOGY CO.,LTD
www.fangjing.tw
1/9
Free Datasheet http://www.Datasheet4U.com
|
FL817 Series
4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER
Package Dimensions
Anode mark
FL
817C
F 044
Package Dimensions
Type
FL
817C
F 044
Notes:
1. Rank shall be or shall not be marked
2. Year date code
3. 2-digit work week
4. All dimensions are in millimeters
5. Specifications are subject to
change without notice
FANGJING TECHNOLOGY CO.,LTD
www.fangjing.tw
2/9
Free Datasheet http://www.Datasheet4U.com
|
FL817 Series
4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER
Absolute Maximum Ratings
Parameter
Forward Current
Input
Reverse Voltage
Power Dissipation
Collector Power Dissipation
Output Collector Current
Collector-Emitter Voltage
Emitter-Collector Voltage
Total Power Dissipation
＊1 Isolation Voltage
Operating Temperature
Storage Temperature
＊2 Soldering Temperature
Symbol
IF
VR
P
PC
IC
VCEO
VECO
Ptot
Viso
Topr
Tstg
Tsol
( Ta=25°C )
Rating
Unit
50 mA
6V
70 mW
150 mW
50 mA
70 V
6V
200 mW
5000
V rms
-55~+110
°C
-55~+125
°C
260 °C
*1 AC for 1 minute, R.H= 40~ 60%RH
-Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and
between collector, emitter and base on the secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
(3) The waveform of applied voltage shall be a sine wave
*2 For 10 seconds
FANGJING TECHNOLOGY CO.,LTD
www.fangjing.tw
3/9
Free Datasheet http://www.Datasheet4U.com
|
| @ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact) |