FD6010B12W5-81

TD100 Series Pressure Transducer Displays User Guide Celerity, Inc. 915 Enterprise Boulevard Allen, TX 75013 USA T +1 972 359 4000 F +1 972 359 4100 153-30268-000 REV. 002 05/08 Free Datasheet http://www.Datasheet4U.com _CONTENTS _1.0 PRODUCT DESCRIPTION AND SPECIFICATIONS _1.1 INTRODUCTION _1.2 INTENDED USE _1.3 PRODUCT DESCRIPTION CODE (PDC) _1.4 PRODUCT LABELING _1.5 TD100 DIMENSIONS _1.6 TD100 SPECIFICATIONS _2.0 UNPACKING AND INSTALLATION INSTRUCTIONS _2.1 UNPACKING AND INSTALLATION _2.2 UNPACKING _2.3 ELECTRICAL INSTALLATION _2.4 CONNECTING THE TD100 TO OPERATE A RELAY _2.5 POSITIONING THE TD100 _3.0 OPERATION _3.1 TD100 OPERATION _3.2 USER MENU FLOW CHART _3.3 OPERATING THE USER MENU _4.0 APPENDIX TD100 CALIBRATION _5.0 WARRANTY 1 1 1 1 2 2 3 4 4 4 4 6 6 7 7 8 9 10 12 p.i Free Datasheet http://www.Datasheet4U.com _ _DESCRIPTION 1.0 1.1 INTRODUCTION Local display of process pressure improves safety and quality control of gas delivery systems. The Celerity TD100 Series Pressure Transducer Display (shown in Figure 1) allows a 4-20 mA pressure transducer to digitally display pressure and send the signal to a final destination. The pressure transducer, such as a Celerity SS2 Pressure Transducer, connects to either the back or bottom of the TD100 with a 4-pin Bendix connector. The TD100 connects to the loop through a 6-wire pigtail cable or to a 4-pin male Bendix connector. The TD100 offers a real time reading. It is loop powered, single channeled, and can swivel...