10 Amp Miniature Power PC Board Relay
TDP
Vishay Thin Film
Molded, Dual-In-Line Resistor Networks
FEATURES
• Lead (Pb)-free available • Standard Rugged, mold...
Description
TDP
Vishay Thin Film
Molded, Dual-In-Line Resistor Networks
FEATURES
Lead (Pb)-free available Standard Rugged, molded case construction (14 and 16 Pin) Highly stable thin film (500 ppm at + 70 °C at 2000 hrs.) Low temperature coefficient (± 25 ppm/°C) Compatible with automatic insertion equipment Standard isolated pin one common schematic
Pb-free Available
RoHS*
COMPLIANT
Actual Size
Vishay Thin Film offers two standard circuits in a 14 and 16 pin molded dual- in-line over a 100 ohm to 100K ohm resistance range. The networks feature ratio tolerance to 0.05 % with a TCR tracking of 5 ppm/°C.
TYPICAL PERFORMANCE
ABS TCR 25 ABS TOL 0.1 TRACKING 5 RATIO 0.05
SCHEMATIC Schematic TDP01
Schematic TDP03
THROUGH HOLE
Pin No. 1
Pin No. 1
TDP-1401 TDP-1601
TDP-1403 TDP-1603
Models: TDP1401 and TDP1601 13 or 15 resistors with one pin common
Models: TDP1403 and TDP1603 7 or 8 isolated resistors
STANDARD ELECTRICAL SPECIFICATIONS
TEST SCHEMATIC Resistance Range TCR: Tolerance: Power Rating: Stability: Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Ratio Ratio Absolute Ratio Absolute Resistor Package ΔR Absolute ΔR Ratio SPECIFICATIONS TDP01, TDP03 100 Ω to 100 kΩ ± 5 ppm/°C ± 25 ppm/°C ± 0.05 % to ± 0.5 % ± 0.1 % 01 Circuit = 0.05 W/resistor 03 Circuit = 0.10 W/resistor 0.8 W/package 500 ppm 150 ppm < 1 ppm/Volt typical 100 Volts - 55 °C to + 125 °C - 55 °C to + 150 °C < - ...
Similar Datasheet