Document
IRFPF50, SiHFPF50
Vishay Siliconix
Power MOSFET
PRODUCT SUMMARY
VDS (V) RDS(on) (Ω) Qg (Max.) (nC) Qgs (nC) Qgd (nC) Configuration VGS = 10 V 200 24 110 Single
D
FEATURES
900 1.6
• • • • • • •
Dynamic dV/dt Rating Repetitive Avalanche Rated Isolated Central Mounting Hole Fast Switching Ease of Paralleling Simple Drive Requirements Compliant to RoHS Directive 2002/95/EC
Available
RoHS*
COMPLIANT
TO-247AC
DESCRIPTION
Third generation Power MOSFETs from Vishay provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The TO-247AC package is preferred for commercial-industrial applications where higher power levels preclude the use of TO-220AB devices. The TO-247AC is similar but superior to the earlier TO-218 package because its isolated mounting hole. It also provides greater creepage distances between pins to meet the requirements of most safety specifications.
G
S D G S N-Channel MOSFET
ORDERING INFORMATION
Package Lead (Pb)-free SnPb TO-247AC IRFPF50PbF SiHFPF50-E3 IRFPF50 SiHFPF50
ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted)
PARAMETER Drain-Source Voltage Gate-Source Voltage Continuous Drain Current Pulsed Drain Currenta Linear Derating Factor Single Pulse Avalanche Energyb Repetitive Avalanche Currenta Repetitive Avalanche Energya Maximum Power Dissipation Peak Diode Recovery dV/dtc Operating Junction and Storage Temperature Range Soldering Recommendations (Peak Temperature) Mounting Torque VGS at 10 V TC = 25 °C TC = 100 °C SYMBOL VDS VGS ID IDM EAS IAR EAR PD dV/dt TJ, Tstg LIMIT 900 ± 20 6.7 4.2 27 1.5 880 6.7 19 190 1.5 - 55 to + 150 300d 10 1.1 UNIT V
A W/°C mJ A mJ W V/ns °C lbf · in N·m
TC = 25 °C
for 10 s 6-32 or M3 screw
Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. VDD = 50 V, starting TJ = 25 °C, L = 37 mH, Rg = 25 Ω, IAS = 6.7 A (see fig. 12). c. ISD ≤ 6.7 A, dI/dt ≤ 130 A/μs, VDD ≤ 600, TJ ≤ 150 °C. d. 1.6 mm from case.
* Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 91251 S11-0441-Rev. B, 14-Mar-11 www.vishay.com 1
Free Datasheet http://www.Datasheet4U.com
This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRFPF50, SiHFPF50
Vishay Siliconix
THERMAL RESISTANCE RATINGS
PARAMETER Maximum Junction-to-Ambient Case-to-Sink, Flat, Greased Surface Maximum Junction-to-Case (Drain) SYMBOL RthJA RthCS RthJC TYP. 0.24 MAX. 40 0.65 °C/W UNIT
SPECIFICATIONS (TJ = 25 °C, unless otherwise noted)
PARAMETER Static Drain-Source Breakdown Voltage VDS Temperature Coefficient Gate-Source Threshold Voltage Gate-Source Leakage Zero Gate Voltage Drain Current Drain-Source On-State Resistance Forward Transconductance Dynamic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Internal Drain Inductance Internal Source Inductance Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current Pulsed Diode Forward Currenta Body Diode Voltage Body Diode Reverse Recovery Time Body Diode Reverse Recovery Charge Forward Turn-On Time IS ISM VSD trr Qrr ton MOSFET symbol showing the integral reverse p - n junction diode
D
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
UNIT
VDS ΔVDS/TJ VGS(th) IGSS IDSS RDS(on) gfs Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf LD LS
VGS = 0 V, ID = 250 μA Reference to 25 °C, ID = 1 mA VDS = VGS, ID = 250 μA VGS = ± 20 V VDS = 900 V, VGS = 0 V VDS = 720 V, VGS = 0 V, TJ = 125 °C VGS = 10 V ID = 4.0 Ab Ab VDS = 100 V, ID = 4.0
900 2.0 4.9
1.2 -
4.0 ± 100 100 500 1.6 -
V V/°C V nA μA Ω S
VGS = 0 V, VDS = 25 V, f = 1.0 MHz, see fig. 5
-
2900 270 92 20 34 130 37 5.0 13
200 24 110 nH ns nC pF
VGS = 10 V
ID = 6.7 A, VDS = 360 V, see fig. 6 and 13b
-
VDD = 450 V, ID = 6.7 A , RG = 6.2 Ω, RD = 67 Ω, see fig. 10b
-
Between lead, 6 mm (0.25") from package and center of die contact
D
-
G
S
-
610 3.2
6.7 A 27 1.8 920 4.8 V ns μC
G
S
TJ = 25 °C, IS = 6.7 A, VGS = 0 Vb TJ = 25 °C, IF = 6.7 A, dI/dt = 100 A/μsb
Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD)
Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. Pulse width ≤ 300 μs; duty cycle ≤ 2 %.
www.vishay.com 2
Document Number: 91251 S11-0441-Rev. B, 14-Mar-11
Free Datasheet http://www.Datasheet4U.com
This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRFPF50, SiHFPF50
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
Fig. 1 - Typical Output Characteristics, TC = 25 °C
Fig. 3 - Typical Transfer Characteristics
Fig. 2 - Typical Output Character.