Document
ProLite 5W SMD Star BTP5-99XXCT-XX-X/W
Package Dimension
Features
Highest Lumen Per Watt
Long Operational Life White Housing Superior ESD Protection
Instant Light (less than 100ns) Compatible to Luxeon’s “Lambertian” True SMD Emitter IR Reflow Soldering Process
Note: Lens is low dome profile
Tolerance: ± see spec Unit: mm
Applications
Accent Light/Down Light/Spot Light Automotive Exterior/Interior Light Large Area LCD Backlights Marine/Miner’s Lighting Portable Flashlight/ General Lighting
Optical Characteristics at TJ=25ºC, IF=700mA
PART NUMBER Emitting Color LED Chip Material Lens Color Water Clear AlInGaP Water Clear Water Clear Water Clear Water Clear AlInGaN Water Clear Water Clear Wavelength (nm) CCT (K) Range Min BTP5-99NRCT-XX-X/W BTP5-99AMCT-XX-X/W BTP5-99YECT-XX-X/W BTP5-99BLCT-XX-X/W BTP5-99PGCT-XX-X/W BTP5-99WWCT-XX-X/W BTP5-99WHCT-XX-X/W
Notes: 1) 2) 3) 4) Picture for illustration purpose only. Please refer to outline dimension for actual package size.
Drive Voltage @ 700mA Typ. 4.40V 4.40V 4.40V 7.10V 7.10V 7.10V 7.10V
Luminous Flux (lm) @700mA Typ. 120 144 112 40 120 96 100
VIEW ANGLE 2θ1/2 (deg)
Max 645 620 600 490 545 3800K 8000K
Normal Red Amber Yellow Blue Green Warm White White
620 610 585 460 520 2800K 5000K
140
Flux is measured with the accuracy of ±15%. Please refer to Flux Selection Guide CCT is measured with the accuracy of ± 400K. Please refer to CCT Selection Guide VF is measured with the accuracy of ± 0.15V. Please refer to VF Selection Guide
Part No.: BTP5-99XXCT-XX-X/W
Rev1.2005
Page 1 of 7
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com
http://www.Datasheet4U.com
ProLite 5W SMD Star BTP5-99XXCT-XX-X/W
Absolute Maximum Ratings at TJ=25ºC
Parameter Red/Amber/Yellow White/Blue/Green
Power Dissipation (W) DC Forward Current (mA)
[1] [4]
4.35 700 1000 700 5 50 16,000
[3]
5.59 700 1000 700 5 50 16,000 135 13 -2 -40 to +105 -40 to +105
Peak Pulsed Forward Current (mA) Average Forward Current (mA) Reverse Voltage (V) Reverse Current (uA) ESD Sensitivity (V) [2]
LED Junction Temperature at 350mA (°C) Temperature Coefficient of VF (mV/°C) Storage Temperature (°C) Operating Temperature (°C) Lead Soldering Temperature (°C)[4]
120 13 -2 -40 to +105 -40 to +105
Thermal Resistance Junction to Board (°C/W)
260°C for 5 seconds max 260°C for 5 seconds max
Application Notes: 1. 2. 3. 4. 5. Proper forward current must be observed to maintain the junction temperature below maximum rating Although all products listed are class two ESD protection (+/- 16KV by HBM mode), care must be fully taken when handling products Specification is subjected to change for improvements without notice. Test conditions: tp≤10us, duty cycle = 0.005 CAUTION: When lighting up, the emitter will become very hot if it is not attached to a heat sink. Please provide proper heat management to prevent damage to the emitter.
Part No.: BTP5-99XXCT-X.