Document
ProLite 5W SMD Star BTP5-99XXCT-XX-X/W
Package Dimension
Features
Highest Lumen Per Watt
Long Operational Life White Housing Superior ESD Protection
Instant Light (less than 100ns) Compatible to Luxeon’s “Lambertian” True SMD Emitter IR Reflow Soldering Process
Note: Lens is low dome profile
Tolerance: ± see spec Unit: mm
Applications
Accent Light/Down Light/Spot Light Automotive Exterior/Interior Light Large Area LCD Backlights Marine/Miner’s Lighting Portable Flashlight/ General Lighting
Optical Characteristics at TJ=25ºC, IF=700mA
PART NUMBER Emitting Color LED Chip Material Lens Color Water Clear AlInGaP Water Clear Water Clear Water Clear Water Clear AlInGaN Water Clear Water Clear Wavelength (nm) CCT (K) Range Min BTP5-99NRCT-XX-X/W BTP5-99AMCT-XX-X/W BTP5-99YECT-XX-X/W BTP5-99BLCT-XX-X/W BTP5-99PGCT-XX-X/W BTP5-99WWCT-XX-X/W BTP5-99WHCT-XX-X/W
Notes: 1) 2) 3) 4) Picture for illustration purpose only. Please refer to outline dimension for actual package size.
Drive Voltage @ 700mA Typ. 4.40V 4.40V 4.40V 7.10V 7.10V 7.10V 7.10V
Luminous Flux (lm) @700mA Typ. 120 144 112 40 120 96 100
VIEW ANGLE 2θ1/2 (deg)
Max 645 620 600 490 545 3800K 8000K
Normal Red Amber Yellow Blue Green Warm White White
620 610 585 460 520 2800K 5000K
140
Flux is measured with the accuracy of ±15%. Please refer to Flux Selection Guide CCT is measured with the accuracy of ± 400K. Please refer to CCT Selection Guide VF is measured with the accuracy of ± 0.15V. Please refer to VF Selection Guide
Part No.: BTP5-99XXCT-XX-X/W
Rev1.2005
Page 1 of 7
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com
http://www.Datasheet4U.com
ProLite 5W SMD Star BTP5-99XXCT-XX-X/W
Absolute Maximum Ratings at TJ=25ºC
Parameter Red/Amber/Yellow White/Blue/Green
Power Dissipation (W) DC Forward Current (mA)
[1] [4]
4.35 700 1000 700 5 50 16,000
[3]
5.59 700 1000 700 5 50 16,000 135 13 -2 -40 to +105 -40 to +105
Peak Pulsed Forward Current (mA) Average Forward Current (mA) Reverse Voltage (V) Reverse Current (uA) ESD Sensitivity (V) [2]
LED Junction Temperature at 350mA (°C) Temperature Coefficient of VF (mV/°C) Storage Temperature (°C) Operating Temperature (°C) Lead Soldering Temperature (°C)[4]
120 13 -2 -40 to +105 -40 to +105
Thermal Resistance Junction to Board (°C/W)
260°C for 5 seconds max 260°C for 5 seconds max
Application Notes: 1. 2. 3. 4. 5. Proper forward current must be observed to maintain the junction temperature below maximum rating Although all products listed are class two ESD protection (+/- 16KV by HBM mode), care must be fully taken when handling products Specification is subjected to change for improvements without notice. Test conditions: tp≤10us, duty cycle = 0.005 CAUTION: When lighting up, the emitter will become very hot if it is not attached to a heat sink. Please provide proper heat management to prevent damage to the emitter.
Part No.: BTP5-99XXCT-XX-X/W
Rev1.2005
Page 2 of 7
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com
http://www.Datasheet4U.com
ProLite 5W SMD Star BTP5-99XXCT-XX-X/W
CCT, Flux and VF Selection Guide (@TJ=25ºC, IF=700mA)
BTP5-99XXCT-XX-X/W
White Housing
Wavelength Ranks Selection
Flux Ranks Selection
Color
Bin B5 B6 B7 B8 B9 B10 XX G7 G8 G9 G10 G11 XX XX XX XX
λD(nm)
Min Max
460 465 465 470 470 475 475 480 480 485 485 490 460 – 490 520 525 525 530 530 535 535 540 540 545 520 – 545 620 – 630 610 – 620 585 – 600
Color
Bin P Q R X T
Flux (lumens)
23~30 30~39 39~50 Default Full Range 65~85 85~111 111~144 144~187 Default Full Range
Blue
Blue
Green
Red Amber Yellow Green White
U V W X
VF Ranks Selection Color Bin
V12 V13 V14 V15 V16 V17 VXX(Full) V27 V29 V30 V31 V32 V33 VXX(Full)
Red Amber Yellow
VF (V) Min Max
3.6 3.8 3.8 4.0 4.0 4.2 4.2 4.4 4.4 4.6 4.6 4.8 3.6~4.8 6.8 7.0 7.0 7.2 7.2 7.4 7.4 7.6 7.6 7.8 7.8 8.0 6.8~8.0
Page 3 of 7
CCT Ranks Selection
Color Temp
Warm White
Bin 00 01 XX 02 03 04 XX
CCT(K) Min Max
2800 3300 5000 6000 7000 3300 3800 6000 7000 8000
Red Amber Yellow
2800K – 3800K
White
Warm White White Blue Green
5000K – 8000K
Rev1.2005
(Please specify on order, otherwise, default full range of VF)
Part No.: BTP5-99XXCT-XX-X/W
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com
http://www.Datasheet4U.com
ProLite 5W SMD Star BTP5-99XXCT-XX-X/W
Typical Electro-Optical Characteristics Curves
Fig. 1 Forward Current vs Ambient Temperature (Green, Blue and White)
Fig. 2 Forward Current vs Ambient Temperature (Red, Amber and Yellow)
Part No.: BTP5-99XXCT-XX-X/W
Rev1.2005
Page 4 of 7
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com
http://www.Datasheet4U.com
ProLite 5W SMD Star BTP5-99XXCT-XX-X/W
Part No.: BTP5-99XXCT-XX-X/W
Rev1.2005
Page 5 of 7
DB LECTR.