DIGITRON SEMICONDUCTORS
BTC05-()A SERIES BTC05-()B SERIES SILICON BIDIRECTIONAL THYRISTORS
Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
MAXIMUM RATINGS
Rating Peak repetitive off-state voltage(1) (TJ = 110°C) BTC05-50A,B BTC05-100A,B BTC05-200A,B BTC05-400A,B BTC05-600A,B RMS on-state current (TC = 80°C) Peak non-repetitive surge current (1 cycle, 60 Hz, TJ = -40 to 110°C) Circuit fusing considerations (TJ = -40 to 110°C , t = 10ms) Peak gate power Average gate power Peak gate voltage Operating junction temperature range Storage temperature range Symbol Value Unit
VDRM
50 100 200 400 600 5 30 4.5 10 0.5 5.0 -40 to +110 -40 to +150
Volts
IT(RMS) ITSM I2t PGM PG(AV) VGM TJ Tstg
Amps Amps A2s Watts Watts Volts °C °C
Note 1: Ratings apply for open gate conditions. Thyristor devices shall not be tested with a constant current source for blocking capability such that the voltage applied exceeds the rated blocking voltage. Note 2: Soldering temperatures shall not exceed +200°C for 10 seconds.
THERMAL CHARACTERISTICS
Characteristic Thermal resistance, junction to case Thermal resistance, junction to ambient Symbol RӨJC RӨJA Maximum 3 60 Unit °C/W °C/W
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted)
Characteristic Peak blocking current (either direction) (Rated VDRM @ TJ = 110°C, gate open) Peak on-state voltage (either direction) (ITM = 5.0A peak) Peak gate trigger voltage (main terminal voltage = 12V, RL = 100Ω) MT2(+), G(+); MT2(+), G(-); MT2(-), G(-) MT2(-), G(+) (main terminal voltage = rated VDRM, RL = 10kΩ, TJ = 110°C) All quadrants Holding current (either direction) (main terminal voltage= 12V, gate open, initiating current = 1.0A, TJ = 25°C) BTC05-()A SERIES BTC05-()B SERIES Turn on time (either direction) (ITM = 14A, IGT = 100mA) Blocking voltage application rate at commutation (@ VDRM, gate open) Symbol IDRM VTM Min Typ. Max 2.0 1.8 Unit mA Volts
VGTM
0.2
-
2.2 2.5 -
Volts
IH
-
1.5 50
10 5.0 -
mA
ton dv/dt
µs V/µs
144 Market Street Kenilworth NJ 07033 USA
phone +1.908.245-7200 fax +1.908.245-0555
[email protected] www.digitroncorp.com
Rev. 20130204
http://www.Datasheet4U.com
DIGITRON SEMICONDUCTORS
BTC05-()A SERIES BTC05-()B SERIES SILICON BIDIRECTIONAL THYRISTORS
QUADRANT Characteristic Peak trigger current (main terminal voltage = 12V, RL = 100Ω) BTC05-()A, TJ = 25°C BTC05-()A, TJ = -40°C BTC05-()B, TJ = 25°C BTC05-()B, TJ = -40°C Symbol I mA II mA III mA IV mA
IGTM
10 25 5.0 15
10 25 5.0 15
10 25 5.0 15
15 40 10 25
MECHANICAL CHARACTERISTIC
Case Marking Pin out TO-220AB Body painted, alpha-numeric See below
TO-220AB Inches Min Max 0.575 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.014 0.022 0.500 0.562 0.045 0.055 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.050 0.045 0.080 Millimeters Min Max 14.600 15.750.