TDA2000-V

DIRECT DRIVEN Series TDA-V Features For commercial and industrial applications where large volumes of air are required at moderate to high pressure, special designed integral straightening vanes, reduced turbulence, provide high performance and low sound level. Construction Double flanged casing is produced in mild steel or galvanised steel, the impeller having manually adjustable pitch aerofoil blades is made of Aluminium. Finish Available in standard finishes of galvanisation or painting. Operating Temperature -20°C to +55°C Motors Totally enclosed Class ‘F’ motor, to a min. IP54 protection are fitted as standard. Standard motor up to 2.2kW are usually supplied on DOL starting, motor 3.0kW and above are star/delta starting. Airflow Direction Kruger Ventilation Industries Pte Ltd certifies that the TDA 2000-V shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA publication 211 and comply with the requirements of the AMCA Certified Ratings Program. Air flowing from impeller to motor is fitted as standard. MODEL: TDA 2000-V / 31BN / 6-6 /__/_ - __/__ Motor no. of pole – 8 Motor Power kW Airflow direction – B Blade angle - 6°, 8°, 10°, 12°, 14°, 16°, 18° 20°, 22°, 24°, 26°, 28°, 30° * All Dimension in mm 32° x Ø14 1400 Ø2000 Ø2073 LEA/TDA2000-V.E0 - March 2008 Ø2130 http://www.Datasheet4U.com 725rpm - 50Hz 0 1300 1200 1100 1000 900 Total Pressure (Pa) 800 700 600 500 400 300 200 100...